Showing 50–58 of 58 results

The Dual 4K HDMI HDBaseT + VGA, 3.5mm, and RS232 over Cat Switching Extender Box Transmitter - 4K 60Hz allows 4K HDMI or VGA sources to be extended using a single Cat6a Ethernet cable. This is an ideal solution where video and audio needs to be extended to displays in conference rooms, classrooms, lecture halls, and many other installation needs that are far beyond the length limitations of standard cabling.This transmitter extends HDMI and VGA signals over a single network patch cable. Extend 4K HDMI up to 115 feet and 1080p VGA up to 230 feet using a Cat5e or Cat6 cable. For longer 4K distances, extend 4K HDMI or up to 130 feet using a Cat6a cable.This HDMI HDBaseT transmitter is HDCP 2.2 compliant, making sure that the connection from the source is secure. With bi-directional PoC support, one power adapter at either transmitter or receiver side can power both units, so no additional power adapter is required, allowing for greater flexibility in installations. The USB Micro-B input supports necessary firmware updates. Advanced users can control one-way IR pass through from the transmitter to the connected receiver and also control and configure both local and remote devices via RS232.

C2G HDBaseT HDMI Extender + RS232 and IR over Cat Scaling Receiver

Cables To Go classroom speakers are specifically designed for use in K-12 classrooms to deliver high quality audio from multimedia presentations, video clips, movies and other curriculum throughout the classroom. This line of speakers is offered in both wall mount and ceiling mount configurations to meet the needs of different classroom designs. Available in industry standard 8 Ohm and 70 volt versions, these speakers ensure long life and quality sound. The Cables To Go Classroom Speakers integrate seamlessly with the TruLink® Audio Amplifier to provide a complete classroom sound system. Additionally, the speakers can be combined with the TruLink® A/V controller and RapidRun® for a complete connected classroom. Ceiling speakers mount easily for a clean, unobtrusive look while dispersing sound down to students at 125 degrees for full classroom coverage. Wall mount speakers work best in classrooms with sharp angles or room partitions (alcoves) or in rooms where ceiling mounting is not a practical option. Designed for long life, rubber surrounds and poly cone construction provide a durable solution that will not degrade over time compared with paper/foam constructed speaker components.

UL listed plenum enclosure for 6 inch ceiling mount speakers All steel enclosure and speaker support bridge systems for use where the ceiling cavity may be in air handling space. The enclosure locks to the bridge with a twist. Mutiple tie points are provided for accessories and safety security wires if required. Please note that the speakers are sold separately.

5-Port HDMI Switch - 4K 60HzThe 5-Port HDMI Switch - 4K 60Hz is a 5-input 1-output switch supporting up to 4K (3840 x 2160 at 60hz, 4:4:4) video, ideal for applications utilizing the HDMI 2.0 standard. A perfect solution for connecting and switching between computers, Blu-ray players, gaming consoles, digital cable or satellite boxes, and A/V receivers. This product offers control and flexibility via a manual push button located conveniently on the front of the switch or by remote control over IR, allowing for quick changes between video sources. This HDMI switch is HDCP 2.2 compliant and supports exceptional 4K UltraHD resolution up to 3840 x 2160 at 60hz with 4:4:4 chroma sub-sampling, handling total HDMI data rates up to 18Gbps.

High impact grade polystyrene enclosure and speaker support bridge system for the installation of 5 inch ceiling mount speakers. The enclosure locks to the bridge with a twist. Multiple tie points are provided for accessories and safety security wires if required.

The HDMI to DisplayPort Converter is the perfect solution for connecting devices with an HDMI output to a display with a DisplayPort input. The HDMI to DisplayPort Converter provides functionality that is not supported by other adapters that are designed to connect the DisplayPort output of a device and to a display which accepts an HDMI input. This Converter extends the life of a device, such as a Blu-ray player, which does not support a DisplayPort output by allowing it to be connected to a new display which accepts a DisplayPort input. The HDMI to DisplayPort Converter supports a maximum resolution of 1920x1200 and supports HDCP.

Perfect for situations where three HDMI devices must share a single HDMI input on a display, this HDMI auto switch provides for hassle free operation. The power required for operation of this switch is provided from the HDMI source devices, so no separate power adapter is required*. With the wealth of devices now using HDMI, it is easy to run out of free HDMI inputs on a HDTV or home theater receiver. This HDMI selector switch solves the problem by providing additional high-definition digital inputs for sources including Blu-ray™ and DVD players, gaming systems, and high-definition cable/satellite boxes.The auto switching functionality provides for a system that is easy to use, while manual switching functionality is available for situations where more control is desired. The auto switching feature is able to sense when a new device is connected or powered on and will automatically switch to that port. When the device is disconnected or powered off, then this feature automatically switches to the first connected device. In situations where three devices are connected to the switch and powered on, or sending an HDMI signal to the switch, the Select button on the top of the switch may be used to switch between the three inputs.*Please note: Most HDMI source devices are able to provide the necessary power for the operation of the HDMI switch; however, in some situations the power supply of the HDMI source device is insufficient and additional power is required. In those situations, power for the HDMI switch may be supplied using our HDMI voltage inserter