Showing 10–20 of 46 results

- Ultra-compact full range- Ideal for restaurants, bars, patios, and retail- Vented LF enclosure- 0.75-inch titanium diaphragm HF driver with neodymium magnetic structure- Full-bandwidth overload protection (LF and HF)- Elliptical weather-resistant ABS enclosure- Paintable black or white finish- Magnetically shielded for video applications- Strong-Arm Mount™ for easy, flexible aiming- ""T"" version for 70 or 100 V distributed systems

- Compact full range- Ideal for shopping malls, sports bars, and health clubs- Vented LF enclosure- 1-inch titanium diaphragm HF driver with neodymium magnetic structure- Coherent Coverage Waveguide- Full-bandwidth overload protection (LF and HF)- Elliptical weather-resistant ABS enclosure- Paintable black or white finish- Magnetically shielded for video applications- Strong-Arm Mount™ for easy, flexible aiming- ""T"" version for 70 or 100 V distributed systems

The loudspeaker shall be a surface mount, two-way, full-range system, with an internal passive crossover. The loudspeaker's low-frequency transducer shall be a 5.25"" (133 mm) woofer, with a weather resistant polypropylene cone, and a 1"" (25 mm) voice-coil. The loudspeaker's high-frequency transducer shall be a 0.75"" (20 mm) Ferro fluid cooled driver, coupled to a baffle-integrated waveguide. The loudspeaker system shall meet the following performance criteria: Power handling, 75 W of IEC 60268-5 continuous pink noise (6 dB crest factor); Frequency response, 55 Hz - 20 kHz (-10 dB from rated sensitivity); Sensitivity, 89 dB at one watt, 100 Hz - 10 kHz at one meter; Impedance, 8 Ohm nominal, 6.5 Ohm minimum. The loudspeaker shall have a transformer suitable for use on 70 V or 100 V distributed lines. The transformer shall have taps ranging from 7.5 W to 60 W, plus an 8 Ohm bypass, selectable using a switch on the rear of the enclosure. The 8 Ohm bypass selection shall be protected by a safety screw. The high-frequency transducer shall drive a waveguide to cover evenly 90° horizontally by 90° vertically. The finish shall be black (RAL 9004) or white (RAL 9003). The grille shall be marine grade aluminum. The loudspeaker shall be adjustable over a range of 90° vertically, using a U-Bracket. The loudspeaker shall have an included U-Bracket. The U-Bracket shall be marine grade aluminum. Electrical connections shall be through a 4-pin detachable Euroblock connector on the input panel. The loudspeaker should include an IP65 weather cover for the input panel.

The loudspeaker shall be a surface mount, two-way, full-range system, with an internal passive crossover. The loudspeaker's low-frequency transducer shall be a 5.25"" (133 mm) woofer, with a weather resistant polypropylene cone, and a 1"" (25 mm) voice-coil. The loudspeaker's high-frequency transducer shall be a 0.75"" (20 mm) Ferro fluid cooled driver, coupled to a baffle-integrated waveguide. The loudspeaker system shall meet the following performance criteria: Power handling, 75 W of IEC 60268-5 continuous pink noise (6 dB crest factor); Frequency response, 55 Hz - 20 kHz (-10 dB from rated sensitivity); Sensitivity, 89 dB at one watt, 100 Hz - 10 kHz at one meter; Impedance, 8 Ohm nominal, 6.5 Ohm minimum. The loudspeaker shall have a transformer suitable for use on 70 V or 100 V distributed lines. The transformer shall have taps ranging from 7.5 W to 60 W, plus an 8 Ohm bypass, selectable using a switch on the rear of the enclosure. The 8 Ohm bypass selection shall be protected by a safety screw. The high-frequency transducer shall drive a waveguide to cover evenly 90° horizontally by 90° vertically. The finish shall be black (RAL 9004) or white (RAL 9003). The grille shall be marine grade aluminum. The loudspeaker shall be adjustable over a range of 90° vertically, using a U-Bracket. The loudspeaker shall have an included U-Bracket. The U-Bracket shall be marine grade aluminum. Electrical connections shall be through a 4-pin detachable Euroblock connector on the input panel. The loudspeaker should include an IP65 weather cover for the input panel.

- Versatile performance for mains, fills, or monitors- DVX3121A woofer with forced-air cooling- 2-inch ND2 titanium/neodymium HF driver- Passive crossover- Choice of 90º x 50º or 60º x 60º coverage horn- High sensitivity, 131 dB maximum SPL- Power handling: 600 W continuous, 2400 W peak- High-impact polypropylene enclosure- Compact monitor-friendly wedge shape- Up to four anchor-plate attachments- M8 mounting inserts (7)- Integrated handle

- Sonically matched to all EV-Innovation lines- Sophisticated 18-dB-octave passive crossover/EQ networks- Asymmetrical enclosure for ideal under-balcony and stage-lip aiming- Optional Neutrik Speakon(R) connector panel- One 1.3-inch (33 mm) diaphragm I compression driver- U-bracket included- Optional 70 V and 100 V operation- OmniMount(R)-compatible rear mounting points- Available in black or white (interior use)- Ultracompact 10 x 16 inch enclosure- 90º x 50º rotatable waveguide- Ultra-high power handling for size: 175 W continuous- 123 dB Max SPL- Asymmetrical trapezoidal enclosure design- Compatible with OmniMount™