Showing 0–10 of 21 results

A light gray trim plate used when mounting the detector over a standard single-gang box.

Mounts on a single-gang box and allows rotation of a detector. Wires are hidden inside.

B338 Universal Ceiling‑mount Bracket the ceiling. It is suitable for use with many detector types. The vertical swivel range is +7° to -16°, while the horizontal swivel range is ±45°.

A black trim plate used when mounting the sensor over a standard single-gang box.

Surface-mount the plastic, low-profile mount to the wall. It is suitable for use with many detector types. The vertical swivel range is +10° to -20°, while the horizontal swivel range is ±25°.

Shallow conduit adapter for a MIC-WMB, a MIC-PMB, or a MIC-SPR, black sand finish (RAL9005).The MIC shallow conduit adapter (MIC-SCA) is designed to work with a wall mount bracket (MIC-WMB) and a pole mount bracket (MIC-PMB), or with a spreader plate (MIC-SPR), to allow MIC Series cameras to be mounted to flat walls or lamp posts, scaffolding, and other nonstandard mounting posts. The MIC-SCA has a single 25 mm side entry conduit fitting hole. There is not sufficient room inside to allow the camera to be mounted to it directly. (Use a MIC-DCA instead.) The MIC-SCA is machined from solid aluminum or stainless steel and provides a 4 in pitched circle diameter (PCD) mounting position for a MIC-WMB. An O-ring provides for a watertight seal to protect the composite cable.

The RFAC-DW-10 spacer kit allows RADION installers and technicians to properly align the RADION door/ window contacts with their corresponding magnets across a wide variety of door/window and frame designs. The spacers also help further separate the magnet/reed switch from metal mounting surfaces which can reduce effective gap width. The result is a faster installation that is more effective in reducing false alarms.

The RFAC-UN-10 spacer kit allows RADION installers and technicians to properly align the RADION universal transmitter with their corresponding magnets across a wide variety of door/window and frame designs. The spacers also help further separate the magnet/reed switch from metal mounting surfaces which can reduce effective gap width. The result is a faster installation that is more effective in reducing false alarms.

Corner mount bracket, black sand finish (RAL9005).The MIC corner mount bracket (MIC-CMB) is designed to work with a wall mount bracket (MIC-WMB) and optional shallow conduit adapter (MIC-SCA) to allow MIC Series cameras to be mounted on the corners of buildings. The MIC-CMB is manufactured from stainless steel and powder coated for maximum corrosion resistance.

Bosch B426. Internal. Connectivity technology: Wired, Interface: Ethernet. Maximum data transfer rate: 100 Mbit/s. Product color: Black, Green