Showing 70–80 of 87 results

Bosch Plena PLM-WCP A/V Control Panel - Multizone - 500 mW - Ethernet

Bosch PLE-1ME060-US. Audio output channels: 1.0 channels, Peak power per channel: 60 W, Total Harmonic Distortion (THD): 1%. AC input voltage: 120 V, AC input frequency: 50 - 60 Hz. Width: 16.9"" (430 mm), Depth: 10.6"" (270 mm), Height: 3.94"" (100 mm)

ANALOG MONITOR CABLE SMB(FEMALE) TO BNC (MALE) 3.0METER

NiMH battery pack for use with LBB 4540 Pocket Receivers. Temperature sensor for optimal charging process

#NAME?

#NAME?

The Electro-Voice EVF-1152D/64 is a high-power, two-way loudspeaker system that can be used in a variety of applications where high-quality sound reinforcement is required in a compact, lightweight package.The EVF-1152D/64 utilizes the DH7N, a high-output 3” titanium compression driver, coupled to a Constant DirectivityTM 60° x 40° waveguide. The DVX3151A 15” woofer was developed using FEA optimization for motor, suspension, and electrical design to ensure very low distortion, high efficiency, and maximum intelligibility at high SPL. The crossover uses steep, 24-dB-per-octave slopes with equalization for very smooth response in the vocal range, linear off-axis response, and a protection circuit for long-term reliability.The EVF-1152D/64’s features make it ideal for many fixed-install applications. The trapezoidal enclosure is constructed of weather resistant birch, and coated with EVCoatTM for maximum protection from the elements. The unique acoustic and rigging design allows for vertical and horizontal clusters to be built using any combina- tion of loudspeakers from the entire EVF and EVH series. With seven horn patterns to choose from, along with an assortment of low-frequency and subwoofer loudspeakers, you have the tools to maximize flexibility of system design, no matter what the application and budget. The innovative input panel provides a choice of Phoenix- style connector (included in all standard models) or the ability to add a dual NL4-type connector cover plate or gland-nut cover plate (for weatherizing applications). An externally accessible jumper selects passive or active operation. An available 70.7/100-V transformer kit may be easily mounted to the input panel for use in distributed systems. All these features give you the flexibility to address a large range of venues, quickly and precisely supporting customer requirements with fewer items in inventory.- DH7N 3” (76 mm) diaphragm, 1.4” (36 mm) exit pure titanium compression driver- DVX3151A 15” (381 mm) LF transducer with fully symmetric drive- Advanced fourth-order crossover network with HF protection- Coverage pattern: 60° x 40° Constant- DirectivityTM 12” rotatable waveguide- 100 dB sensitivity, 134 dB maximum SPL- System rating: 600 W continuous, 2400 W peak- Active rating: LF 500 W/HF 75 W continuous (2000 W/300 W peak)- (22) M10 threaded suspension points

Bosch DCNM-APS2. Width: 17.3"" (440 mm), Depth: 15.7"" (400 mm), Height: 3.62"" (92 mm). Audio input channels: 2 channels, Audio output channels: 2 channels

EVF-1122S/99 features a 90° x 90° rotatable waveguide, design for near field wide spread coverage pattern. - 2-inch ND2B titanium HF compression driver - Rotatable Constant-directivity waveguide - Six available patterns with coverage from 60º to 120º - 98 dB sensitivity, 131 dB maximum SPL - Power handling: 500 W continuous, 2000 W peak - 4th-order passive crossover with HF protection - Trapezoidal 13-ply birch enclosure in three finishes: EVCoat, PI, and fiberglass (FG)

Every EVF trapezoidal enclosure is constructed out of weather-resistant birch, and coated with EVCoat for maximum protection from the elements. EVF‘s unique acoustic and rigging designs allow for vertical and horizontal clusters to be built using any combination of loudspeakers from both the entire EVF & EVH Series. With an assortment of full-range, low-frequency, and subwoofer loudspeakers, the EVF Series provides the tools to maximize the flexibility of system design, no matter what the application and budget. EVF‘s innovative input panels provide the choice of Phoenix-type connectors (included in all standard models), or allow the easy addition of a dual NL4-type connector cover plate or gland nut cover plate (for weatherizing applications). An externally accessible jumper also selects passive or active operation, and an available 70.7/100V transformer kit simply mounts to the input panel for use in distributed systems. All features provide the flexibility to manage more venues with less equipment, while quickly and precisely addressing customer requirements.- 2-inch ND2B titanium HF compression driver- Rotatable Constant-directivity waveguide- Six available patterns with coverage from 60º to 120º- 98 dB sensitivity, 131 dB maximum SPL- Power handling: 500 W continuous, 2000 W peak- 4th-order passive crossover with HF protection- Trapezoidal 13-ply birch enclosure in three finishes: EVCoat, PI, and fiberglass (FG)