Showing 60–70 of 125 results

The KL1508Ai Dual Rail LCD KVM Switch is a control unit that allows secure access up to 8 computers from a single KVM (keyboard, video, and mouse) console. It consists of an integrated LCD monitor, keyboard, and touchpad in a 1U rack-mountable retractable sliding housing. The LCD and keyboard/touchpad modules slide independently of each other. To maximize space in your data center, the keyboard/touchpad module slides back to “ hide away ” when not in use, while the thin profile LCD monitor rotates back – flush against the rack – allowing convenient monitoring of computer activity. The KL1508Ai features IP-based connectivity that allows local and remote operators to monitor and access the computers on your installation. Because it uses TCP/IP for its communications protocol, the KL1508Ai can be accessed from any computer on the LAN, WAN, or Internet – whether that computer is located down the hall, down the street, or halfway around the world.Compact, high-density, RJ-45 connectors and Cat 5e/6 cable make for a compact, efficient, wiring configuration, while the use of KVM Adapter Cables to link to the computers, permits any combination of PCs, Macs, Sun computers, and serial devices to coexist on the installation. For added convenience, ports for an external keyboard, monitor, and mouse are provided on the rear panel – permitting you to manage the switch from a local console. There is also an external USB mouse port on the keyboard module, allowing you to use an external mouse, rather than the touchpad. Enhanced features include a Panel Array Mode™ that displays the video output of up to 8 computers at the same time, and a Message Board that allows logged in users to conveniently and instantly communicate with one other – no matter where in the world they actually are. The KL1508Ai is an ideal solution for your server room management.HardwareExclusive LED illumination light - designed by ATEN to illuminate the keyboard and touchpad to allow visibility in low-light conditions-Integrated KVM console with 17¨ or 19¨ LED-backlit LCD monitor in a Dual Rail housing-A single console controls up to 8 computers-Daisy chain up to 15 additional KVM switches to control up to 128 computers*-One bus for remote KVM over IP access-Space-saving RJ-45 connectors and Cat 5e/6 cabling-KVM adapter cables designed with automatic conversion to allow flexible interface combinations (PS/2, USB, Sun and serial) to control all computer types-Extra console port – manage computers in the LCD KVM switch from an external console (monitor, USB or PS/2 keyboard, and USB or PS/2 mouse)-Multiplatform support: PC, Mac, Sun and Serial-Supports external USB mouse-Dual Rail housing is slightly less than 1U with top and bottom clearance for smooth operation in 1U of rack space-Dual Rail – LCD monitor slides independently of the keyboard/touchpad-LCD module rotates up to 120 degrees for a more comfortable viewing angle-Console lock – enables the console drawer to remain securely locked away in position when not in use-LCD power button helps save energy and prolong displays´ life* Compatible KVM switches: KH1508A/KH1516A, KH0116, ACS1208A/ACS1216A, CS1708A/CS1716A, KH1508/KH1516Management-Up to 64 user accounts-Up to 32 concurrent logins-End session feature – administrators can terminate any running session-Adapter ID – stores port information allowing administrators to relocate servers to different ports, without having to reconfigure the adapters and switch-Port Share Mode allows multiple users to gain access to a server simultaneously-Remote power control for attached Power Over the NET™ devices-Integration with ALTUSEN CC2000 Management software-Event logging and Windows-based Log Server support-Local Log Event-Firmware upgradeable-IPv6 capable Easy-to-Use Interface-Easy computer selection via pushbuttons, Hotkey Mode, OSD (OnScreen Display), and Browser-based GUI-Local Console, Browser, and AP GUIs offer a unified multi language interface to minimize user training time and increase productivity-Multiplatform client support (Windows, Mac OS X, Linux, Sun)-Multi-browser support: Internet Explorer, Chrome, Firefox, Safari, Opera, Mozilla, Netscape-Browser-based UI in pure Web technology allows administrators to perform administrative tasks without the need for Java to be pre-installed-Panel Array Mode™-Keyboard broadcast* – keyboard input can be duplicated on all the attached servers* Local Console only Advanced Security-Remote authentication support: RADIUS, LDAP, LDAPS, and MS Active Directory-Supports TLS 1.2 data encryption and RSA 2048-bit certificates to secure users log in from browser-Flexible encryption design allows users to choose any combination of 56-bit DES, 168-bit 3DES 256-bit AES, 128-bit RC4, or Random for independent KB/Mouse, and video data encryption-IP/MAC Filter support for enhanced security protection-Configurable user and group permissions for server access and control Virtual Remote Desktop-Video quality and video tolerance can be adjusted to optimize data transfer speed; monochrome color depth setting, threshold and noise settings for compression of the data bandwidth in low bandwidth situations-Full-screen or sizable and scalable Virtual Remote Desktop-Message board feature allows logged in users to communicate with each other-Mouse DynaSync™ – automatically synchronizes the local and remote mouse movements-On-screen keyboard with multi language support-BIOS-level access-Keyboard Language support: English (US), English (UK), French, German, German (Swiss), Hungarian, Italian, Japanese, Korean, Russian, Spanish, Swedish, and Traditional ChinesePackage Contents-1x KL1508Ai Dual Rail LCD KVM Switch-1x Power Cord-1x Standard Rack Mount Kit-1x Firmware Upgrade Cable-1x User Instructions

The CS1642A 2-Port USB DVI Dual View KVMP™ Switch is a multi-application device that integrates a 2-port KVM switch with 2-port USB hub. The newest version now supports Quad-View functionality with two Dual View KVM Switches connected.The new CS1642A features multi-view capabilities, which allow two switches to be daisy chained for a dual, triple, or quadview display across multi-monitor installations. The CS1642A supports advanced nVidia 3D Vision ready 120Hz 3D displaying,allowing you to manage various 3D visual effects. It allows you to manipulate all connected computers from a single console to save resources and work space. It enables each computer to access connected peripherals on a one-computer-at-a-time basis, making it ideal for users who need delicate visual effects and multi-tasking on several computers. The CS1642A is perfect for graphic designers, banking and financial consultants, gamers and medical professionals-demanding a high quality switch that provides stunning color, clarity and functionality.

The CL1000 is a LCD KVM console that serves as the front-end for standard KVM switches. The CL1000 features an integrated 17"" or 19” LED-backlit LCD panel, full keyboard, and touchpad in a 1U, rack-mountable, Slideaway™ housing.Users who already have a switch can take advantage of the space saving and efficiency benefits of the CL1000 LCD KVM console without the unnecessary expense of having to purchase a KVM switch. This model provides convenient ‘at the rack’ console access to KVM switches already installed at your site. Features:-Exclusive LED illumination light - designed by ATEN to illuminate the keyboard and touchpad to allow visibility in low-light conditions-Integrated KVM console with 17"" or 19” LED-backlit LCD monitor – in a sliding housing with top and bottom clearance for smooth operation in a 1U high system rack*-LCD module rotates up to 115 degrees for a more comfortable viewing angle-Slideaway™ housing is less than 1U – with top and bottom clearance for smooth operation in a 1U high system rack-Compatible with most PS/2 KVM Switches-Internal power supply-Adjustable depth to fit within a rack-High video resolution: • Supports input video resolutions up to 1920 x 1200 @ 60 Hz; and up to 1280 x 1024 @ 75 Hz with the built-in LCD screen • Supports DDC, DDC2, DDC2B • DDC emulation of the LCD monitor–Video settings of attached computers are automatically adjusted for optimal output to the LCD monitor-Keyboard Language support: English (US), English (UK), French, German, German (Swiss), Greek (CL1000N only), Hungarian, Italian, Japanese, Korean, Russian, Spanish, Swedish, and Traditional Chinese-Improved design – optional single person installation kitNote: Custom KVM cables or converters are available for USB support* Compatible rack mounting kit:CL1000M: 2X-010G, 2X-011G, 2X-012GCL1000N: 2X-023G, 2X-024G, 2X-025GPackage Contents 1x CL1000M or CL1000N with Standard Rack Mount Kit 1x Custom KVM Cable (VGA, USB; 1.8m/6ft) 1x Power Cord 1x User Instructions

The CS1644A 4-Port USB DVI Dual View KVMP™ Switch is a multi-application device that integrates a 4-port KVM switch with 2-port USB hub. The newest version now supports Quad-View functionality with two Dual View KVM Switches connected.The new CS1644A features multi-view capabilities, which allow two switches to be daisy chained for a dual, triple, or quadview display across multi-monitor installations. The CS1644A supports advanced nVidia 3D Vision ready 120Hz 3D displaying,allowing you to manage various 3D visual effects. It allows you to manipulate all connected computers from a single console to save resources and work space. It enables each computer to access connected peripherals on a one-computer-at-a-time basis, making it ideal for users who need delicate visual effects and multi-tasking on several computers. The CS1644A is perfect for graphic designers, banking and financial consultants, gamers and medical professionals- demanding a high quality switch that provides stunning color, clarity and functionality.

The CS22D 2-Port USB DVI KVM Switch is a control unit that allows access to two computers from a single USB and DVI console (keyboard, video and mouse). With the CS22D, you can access the computers conveniently via a Remote Port Selector.

The CE680 is a DVI Optical KVM Extender that overcomes length restrictions of standard DVI cables by using fiber optics to send high definition audio, video and control signals over longer distances. The CE680 can transmit KVM DVI signals very long distances - up to 600 m away from the source. The extender takes audio/video streams from the local source and serializes the data to pass it over a single 3.125 Gbps optical link, for resolutions up to 1920 x 1200 @ 60Hz, 24-bits, with picture perfect quality.In addition to extending keyboard and mouse control, the CE680 also transfers RS-232 signals (up to 115 kbps) and USB signals in both directions, with ports for both, allowing you to connect serial devices, such as barcode scanners; or USB devices such as touchscreens, which can provide access to a computer connected at the local site - up to 600 m away. The CE680 allows access to a computer from both the local and remote consoles (USB keyboard, monitor, and mouse). Furthermore, the CE680 takes advantage of the newest fiber optic cable technology to connect the local and remote units; providing easy installation and a very long 600 m extension of KVM DVI signals.

The CE690 is a DVI Optical KVM Extender that overcomes the length restrictions of standard DVI cables by using fiber optics to send high definition audio, video and control signals over long distances. The CE690 can transmit KVM DVI signals extremely long distances - up to 20 km away from the source. The extender takes audio/video streams from the local source and serializes the data to pass it over a single 3.125 Gbps optical link, for resolutions up to 1920 x 1200 @ 60Hz, 24-bits, with picture perfect quality.In addition to extending keyboard and mouse control, the CE690 also transfers RS-232 signals (up to 115 kbps) and USB signals in both directions, with ports for both, allowing you to connect serial devices, such as barcode scanners; or USB devices such as touchscreens, which can provide access to a computer connected at the local site - up to 20 km away. The CE690 allows access to a computer from both the local and remote consoles (USB keyboard, monitor, and mouse). Furthermore, the CE690 takes advantage of the newest fiber optic cable technology to connect the local and remote units; providing easy installation and an extremely long 20 km extension of KVM DVI signals.

With limited server room space and rising maintenance costs, network administrators are now more than ever looking for solutions that reduce both costs and space requirements. ATEN LCD KVM Switches offer a space saving, streamlined approach to KVM switching technology by integrating an LCD panel, full keyboard, and touchpad into a 1U rack-mountable sliding housing.The CL1308 LCD KVM Switch features an integrated 19"" LCD panel allowing access and control with up to 8 computers from a single console (keyboard, mouse, and monitor). As many as 8 additional switches can be cascaded bringing the total number of connected computers to 128 computers that can be controlled from a single keyboard-monitor-mouse console.Setup is fast and easy; plugging cables into their appropriate ports is all that is needed. The switch supports both USB and PS/2 connections for the computers. The CL1308 intercepts keyboard input directly, thus eliminating the need for any software configuration. Switching between computers can be easily accomplished either by manually pressing the front panel push button port LEDs, entering hotkey combinations from the keyboard, or via a menu driven multilingual on-screen display (OSD) system.- A single console controls up to 128 computers by cascade to 2 levels and connect up to 8 switches.- Integrated KVM console with 19"" LCD panel- Dual Interface – supports computers with PS/2 or USB keyboards and mice- Multiplatform support – Windows 2000/XP/Vista, Linux, Mac, and Sun- Supports USB keyboards for PC, Mac and Sun- Auto PS/2 and USB interface detection- USB or PS/2 keyboard and mouse emulation – computers boot even when the console focus is elsewhere- Superior video quality – up to 1280 x 1024 @ 75 Hz; DDC2B- Convenient computer switching via front panel push buttons, hotkeys, or multilingual on-screen display (OSD) menu- Two level password security - only authorized users view and control computers; up to four users and an administrator with a separate profi le for each- Auto Scan feature for monitoring user-selected computers- Broadcast mode – operations simultaneously performed on all selected computers- Hot pluggable – add or remove computers without having to power down the switch- Buzzer on/off via hotkey and OSD- Rack mountable- Keyboard Language support: English(US); English(UK); German;German(Swiss); French; Spanish; Traditional Chinese; Japanese; Korean;Swedish; Italian; Russian; Hungarian; Greek

With limited server room space and rising maintenance costs, network administrators are now more than ever looking for solutions that reduce both costs and space requirements. ATEN LCD KVM Switches offer a space saving, streamlined approach to KVM switching technology by integrating an LCD panel, full keyboard, and touchpad into a 1U rack-mountable sliding housing.The CL1316 LCD KVM Switch features an integrated 19"" LCD panel allowing access and control with up to 16 computers from a single console (keyboard, mouse, and monitor). As many as 16 additional switches can be cascaded bringing the total number of connected computers to 256 computers that can be controlled from a single keyboard-monitor-mouse console.Setup is fast and easy; plugging cables into their appropriate ports is all that is needed. The switch supports both USB and PS/2 connections for the computers. The CL1316 intercepts keyboard input directly, thus eliminating the need for any software configuration. Switching between computers can be easily accomplished either by manually pressing the front panel push button port LEDs, entering hotkey combinations from the keyboard, or via a menu driven multilingual on-screen display (OSD) system.- A single console controls up to 256 computers by cascade to 2 levels and connect up to 16 switches.- Integrated KVM console with 19"" LCD panel- Dual Interface – supports computers with PS/2 or USB keyboards and mice- Multiplatform support – Windows 2000/XP/Vista, Linux, Mac, and Sun- Supports USB keyboards for PC, Mac and Sun- Auto PS/2 and USB interface detection- USB or PS/2 keyboard and mouse emulation – computers boot even when the console focus is elsewhere- Superior video quality – up to 1280 x 1024 @ 75 Hz; DDC2B- Convenient computer switching via front panel push buttons, hotkeys, or multilingual on-screen display (OSD) menu- Two level password security - only authorized users view and control computers; up to four users and an administrator with a separate profi le for each- Auto Scan feature for monitoring user-selected computers- Broadcast mode – operations simultaneously performed on all selected computers- Hot pluggable – add or remove computers without having to power down the switch- Buzzer on/off via hotkey and OSD- Rack mountable- Keyboard Language support: English(US); English(UK); German;German(Swiss); French; Spanish; Traditional Chinese; Japanese; Korean;Swedish; Italian; Russian; Hungarian; Greek

ATEN’s 4th generation of KVM over IP switches exceed expectations. The KN4164V features superior video quality (Full HD resolution of 1920 x 1200), FIPS 140-2 with level 1 security standards and virtual media transmissions at twice the speed. The KN series provides local console and remote over IP access for users to monitor and access their entire data center over a network. In addition, it offers out-of-band access with external modem support for BIOS-level troubleshooting when the network is down.  ENQUIRE A TEST NOW!New KN Series Exclusive : • Advanced FPGA graphics processor – with an Full HD resolutions of 1920 x 1200• Extreme virtual media speed – 2 x faster virtual media transmission speed• High grade security – supports FIPS 140-2 level 1 security standards With dual on-board NICs and dual power supplies, the KN series are built for reliability, to ensure 24/7 availability of remote access to all servers. The KN series offers out-of-band (OOB) management that enables IT administrators to manage network devices (e.g. server, storage, router/switch) in server rooms via management networks that are separate from the main/production networks. So if there’s difficulty in accessing the network devices through the production network, the administrators can still access them via the KVM switch. The KVM switch offers several out-of-band access methods, such as a direct console connection from a local computer, a USB console connection from a laptop, a PSTN connection via modem, or a dedicated management network connection via the Ethernet (LAN) port. KN series devices can be integrated into the CC2000 Management Software. The CC2000 puts administrators in complete control of remote data centers and branch offices no matter where they are in the world – allowing IT administrators to remotely monitor and control all devices on a network, including blade servers and virtual machines.In addition, the KN series is compatible with ATEN’s KVM over IP Console Station, the KA82 series. The KA82 series is a hardware-based standalone console solution that can centrally manage multiple KN devices. It is especially suitable for environments where a PC is not allowed. The KVM over IP Console Station features a 0U space-saving compact design and low power consumption for 24/7 operations. To help you manage and control an entire data center, ATEN KVM over IP switches support blade servers and chassis. With powerful features such as Power Association – KVM ports can be associated with ATEN PDU power outlets for power management of servers from the KVM over IP switches’ user interface. Additional exclusive features of ATEN KVM over IP switches include: a Message Board, Panel Array Mode™, Mouse DynaSync™ and the Adapter ID.A Windows Client and a Java Client are available for remote access. They allow IP connection and login from anywhere over the internet. In addition, ATEN also provides an iOS APP - PadClient, whose intuitive interface makes it easy to connect to the KVM over IP switch and control computers direct from your iPad. Please visit the PadClient webpage for more information. ATEN KVM over IP switches save you time and money by allowing administrators to manage their data centers from practically anywhere – minimizing travel and MTTR (Mean Time to Repair) costs, ensuring the highest availability for data center services possible.