Showing 240–250 of 554 results

Intuitive LCD interfaceProvides clear and accurate information in multiple languages with the ability to configure the UPS locally with easy to use navigation keys.Predictive replace battery dateDynamically provides the month and year when battery replacement is recommended to aide in long term maintenance planning.Green modePatent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.Energy meterProvides actual kilowatt hours of usage for energy conscious users.Sequenced shutdown and restartConfigure select outlet groups to shut down and turn on in a pre-determined order (for UPSs with switched outlet groups).InfraStruXure Central compatibleEnables centralized management via APC InfraStruXure® Central.Pure sine wave output on batterySimulates utility power to provide the highest degree of compatibility for active PFC (power factor corrected) servers and sensitive electronics.Single switched outlet groupSingle outlet group that may be controlled separately from the UPS for discrete reboot of hung devices, sequenced on/off and non-critical load shedding.High online efficiencyReduces utlility costs, generates less heat.SmartSlotCustomize UPS capabilities with management cards.Cold-start capableProvides temporary battery power when the utility power is out.Temperature-compensated battery chargingProlongs battery life by regulating the charge voltage according to battery temperature.

Dual mains input Increases availability by allowing the UPS to be connected to two separate power sources. Scalable runtime Allows additional run time to be quickly added as needed. Hot-swappable batteries Ensures clean, uninterrupted power to protected equipment while batteries are being replaced Generator compatible Ensures clean, uninterrupted power to protected equipment when generator power is used. Automatic internal bypass Supplies utility power to the connected loads in the event of a UPS overload condition or fault. Battery modules connected in parallel Delivers higher availability through redundant batteries. Serviceability User-replaceable batteries Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR) Battery replacement without tools Allows quick, easy battery replacement. Automatic self-test Periodic battery self-test ensures early detection of a battery that needs to be replaced. Shippable with modules installed Enables pre-installation UPS staging and testing and faster installation. Modular design Provides fast serviceability and reduced maintenance requirements via self-diagnosing, field-replaceable modules. Manageability Network manageable Provides remote management of the UPS over the network. InfraStruXure Manager Compatible Enables centralized management via the APC InfraStruXure Manager. LCD display Alpha-Numeric Display which displays system parameters and alarms. Audible alarms Provides notification of changing utility power and UPS conditions Programmable frequency Ensures compatibility with different input frequencies. LED status indicators Quickly understand unit and power status with visual indicators. SmartSlot Customize UPS capabilities with management cards. Total Cost of Ownership Input power factor correction Minimizes installation costs by enabling the use of smaller generators and cabling. Temperature-compensated battery charging Prolongs battery life by regulating the charge voltage according to battery temperature. Manual maintenance bypass Reduces installation costs by eliminating the need for an external mechanical bypass. Intelligent battery management Maximizes battery performance, life, and reliability through intelligent, precision charging. Protection Frequency and voltage regulation Gives higher application availability by correcting poor frequency and voltage conditions without using the battery. Safety-agency approved Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment. Cold-start capable Provides temporary battery power when the utility power is out.

Intuitive LCD interfaceProvides clear and accurate information in multiple languages with the ability to configure the UPS locally with easy to use navigation keys.Predictive replace battery dateDynamically provides the month and year when battery replacement is recommended to aide in long term maintenance planning.Green modePatent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.Energy meterProvides actual kilowatt hours of usage for energy conscious users.InfraStruXure Central compatibleEnables centralized management via APC InfraStruXure® Central.Pure sine wave output on batterySimulates utility power to provide the highest degree of compatibility for active PFC (power factor corrected) servers and sensitive electronics.Single switched outlet groupSingle outlet group that may be controlled separately from the UPS for discrete reboot of hung devices, sequenced on/off and non-critical load shedding.Battery failure notificationProvides early-warning fault analysis on batteries enabling timely preventive maintenanceSmartSlotCustomize UPS capabilities with management cards.Cold-start capableProvides temporary battery power when the utility power is out.Resettable circuit breakersEnables a quick recovery from overload events.Hot-swappable batteriesEnsures clean, uninterrupted power to protected equipment while batteries are being replacedDisconnected battery notificationWarns when a battery is not available to provide backup power.Automatic self-testPeriodic battery self-test ensures early detection of a battery that needs to be replaced.Automatic restart of loads after UPS shutdownAutomatically starts up the connected equipment upon the return of utility power.Adjustable voltage-transfer pointsMaximizes useful battery life by widening the input voltage window or tightening the output voltage regulation.Adjustable voltage sensitivityProvides the ability to adapt the UPS for optimal performance in specific power environments or generator applications.Audible alarmsProvides notification of changing utility power and UPS conditionsUser-replaceable batteriesIncreases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)USB connectivityProvides management of the UPS via a USB port (not available on all models).Serial ConnectivityProvides management of the UPS via a serial port.Temperature-compensated battery chargingProlongs battery life by regulating the charge voltage according to battery temperature.Boost and Trim Automatic Voltage Regulation (AVR)Gives higher application availability by correcting low and high voltage conditions without using the battery.Intelligent battery managementMaximizes battery performance, life, and reliability through intelligent, precision charging.Safety-agency approvedEnsures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.Power conditioningProtects connected loads from surges, spikes, lightning, and other power disturbances.Network manageableProvides remote management of the UPS over the network.Predicitive failure notificationProvides early-warning fault analysis ensuring proactive component replacement.

APC Smart-UPS VT, 8000 Watts / 10 kVA,Input 400V 3PH / Output 230V, 400V 3PH, Interface Port DB-9 RS-232, Smart-Slot, Extended runtime model Includes: Battery modules ship installed, Bolt down brackets, CD with software, Installation guide, Network Management Card, Smart UPS signalling RS-232 cable, Start up included, User Manual Standard Lead Time: Usually Ships within 2 Weeks

Smart-UPS® VT Compact 3-phase power protection with scalable runtime for small data centers and other business critical applicationsAPC Smart-UPS VT-24 kW.-30 kVA.-Input 480V 3PH.-Output 120V, 208V, 208V 3PH.-Extended runtime model.

Reliable and flexible DC power solutions for customer premise broadband, low power wireless and other telecommunication applications.

Intuitive LCD interfaceProvides clear and accurate information in multiple languages with the ability to configure the UPS locally with easy to use navigation keys.Predictive replace battery dateDynamically provides the month and year when battery replacement is recommended to aide in long term maintenance planning.Green modePatent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.Energy meterProvides actual kilowatt hours of usage for energy conscious users.Outlet group controlTurn on/off, reboot or shut down select outlet groups to save dispatching technicians to remote locations (for UPSs with switched outlet groups).Sequenced shutdown and restartConfigure select outlet groups to shut down and turn on in a pre-determined order (for UPSs with switched outlet groups).InfraStruXure Central compatibleEnables centralized management via APC InfraStruXure® Central.Pure sine wave output on batterySimulates utility power to provide the highest degree of compatibility for active PFC (power factor corrected) servers and sensitive electronics.Single switched outlet groupSingle outlet group that may be controlled separately from the UPS for discrete reboot of hung devices, sequenced on/off and non-critical load shedding.Sine wave outputEliminates humming and heat generated when powering tubelights and fans.Battery failure notificationProvides early-warning fault analysis on batteries enabling timely preventive maintenanceLED IndicatorsProvide easy-to-read status of the unit and utility power conditions.Hot-swappable batteriesEnsures clean, uninterrupted power to protected equipment while batteries are being replacedDisconnected battery notificationWarns when a battery is not available to provide backup power.

Resettable circuit breakersEnables a quick recovery from overload events.Field-replaceable power distribution panelEnsures compatibility with equipment that has different plug types.Multiple cable-entry pointsProvides flexibility of UPS placement in the room and easy access to install cabling to the terminal blocks.Locking cabinetPrevents unauthorized access to the UPS.AvailabilityDual mains inputIncreases availability by allowing the UPS to be connected to two separate power sources.Scalable runtimeAllows additional run time to be quickly added as needed.Hot-swappable batteriesEnsures clean, uninterrupted power to protected equipment while batteries are being replacedGenerator compatibleEnsures clean, uninterrupted power to protected equipment when generator power is used.Automatic internal bypassSupplies utility power to the connected loads in the event of a UPS overload condition or fault.Battery modules connected in parallelDelivers higher availability through redundant batteries.

InfraStruXure Central compatibleEnables centralized management via APC InfraStruXure® Central.Battery failure notificationProvides early-warning fault analysis on batteries enabling timely preventive maintenanceModular designIncreases adaptability with an open architecture configurable to any IT environment.Modular designModular construction - can be deployed as a non-standby and migrate to a standby (UPS) system.Dual mains inputIncreases availability by allowing the UPS to be connected to two separate power sources.SmartSlotCustomize UPS capabilities with management cards.Hot-swappable intelligence modulesEnsures clean, uninterrupted power to protected equipment during Intelligence Module replacement.Hot-swappable batteriesEnsures clean, uninterrupted power to protected equipment while batteries are being replacedConfigurable for N+1 internal redundancyProvides high availabilty through redundancy by allowing configuration with one more Power Module than is necessary to support the connected load.Automatic self-testPeriodic battery self-test ensures early detection of a battery that needs to be replaced.Battery modules connected in parallelDelivers higher availability through redundant batteries.Temperature-compensated battery chargingProlongs battery life by regulating the charge voltage according to battery temperature.

Symmetra PX 100kW Scalable to 250kW with Left Mounted Maintenance Bypass and DistributionInfraStruXure Central compatibleEnables centralized management via APC InfraStruXure® Central.Battery failure notificationProvides early-warning fault analysis on batteries enabling timely preventive maintenanceModular designIncreases adaptability with an open architecture configurable to any IT environment.Modular designModular construction - can be deployed as a non-standby and migrate to a standby (UPS) system.Dual mains inputIncreases availability by allowing the UPS to be connected to two separate power sources.SmartSlotCustomize UPS capabilities with management cards.Hot-swappable intelligence modulesEnsures clean, uninterrupted power to protected equipment during Intelligence Module replacement.Hot-swappable batteriesEnsures clean, uninterrupted power to protected equipment while batteries are being replacedConfigurable for N+1 internal redundancyProvides high availabilty through redundancy by allowing configuration with one more Power Module than is necessary to support the connected load.Automatic self-testPeriodic battery self-test ensures early detection of a battery that needs to be replaced.Battery modules connected in parallelDelivers higher availability through redundant batteries.Temperature-compensated battery chargingProlongs battery life by regulating the charge voltage according to battery temperature.