Showing 350–360 of 814 results

NetBotz 1356 kHz Rack Access ControlNetwork appliances enabling remote and local access control for your NetShelter SX enclosures.

APC Symmetra PX 250kW Power Module Frame, 400/480VConfigurable for N+1 internal redundancyProvides high availability through redundancy by allowing configuration with one more Power Module than is necessary to support the connected load.Hot-swappable power modulesEnsures clean, uninterrupted power to protected equipment during Power Module replacement.Configurable for N+1 internal redundancyProvides high availability through redundancy by allowing configuration with one more Power Module than is necessary to support the connected load.Power Modules connected in parallelEnhances availability by allowing immediate, seamless recovery from isolated module failures.Swappable power modulesAllows quick addition of power capacity or replacement of existing power modules. Installed modules are automatically recognized by the system.Modular designProvides fast serviceability and reduced maintenance requirements via self-diagnosing, field-replaceable modules.Network manageableProvides remote power management of the UPS over the network.Automatic internal bypassSupplies utility power to the connected loads in the event of a UPS power overload or fault.Redundant Intelligence ModulesProvides higher availability to the UPS connected loads by giving redundant communication paths to critical UPS functions.Integrates with StruxureWare Data Center ExpertAn IT-ready, scalable access monitoring system that collects, organizes, and distributes critical alerts, surveillance video and key information, providing a unified view of complex physical infrastructure environments from anywhere on the networkLED status indicatorsQuickly understand unit and power status with visual indicators.Audible alarmsProvides notification of changing utility power and UPS power conditionsEU CoC for UPSEnsures that UPSs sold in the EU are highly efficientENERGY STAR for UPSEstablishes that the efficiency of the UPS is in the top 25% of the market as verified by third party testingNetwork manageableProvides remote power management of the UPS over the network.Fully-rated power kVA equals kWReduces cost by eliminating the need for an oversized UPS for Power Factor Corrected (PFC) loads.Generator compatibleEnsures clean, uninterrupted power to protected equipment when generator power is used.Scalable power capacityReduces UPS over-sizing costs today by allowing quick power upgrades, within the same footprint, later.Modular designProvides fast serviceability and reduced maintenance requirements via self-diagnosing, field-replaceable modules.User-replaceable power modulesEnables simple upgrades and replacements of the Power Modules.User-replaceable batteriesIncreases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)Power Modules connected in parallelEnhances availability by allowing immediate, seamless recovery from isolated module failures.Configurable for N+1 internal redundancyProvides high availability through redundancy by allowing configuration with one more Power Module than is necessary to support the connected load.Battery modules connected in parallelDelivers higher availability through redundant batteries.Programmable frequencyEnsures compatibility with different input frequencies.SmartSlotCustomize UPS capabilities with management cards.Scalable power capacityReduces UPS over-sizing costs today by allowing quick power upgrades, within the same footprint, later.5x8 Start-up service includedRequired for full coverage of factory warrantyFully-rated power kVA equals kWReduces cost by eliminating the need for an oversized UPS for Power Factor Corrected (PFC) loads.Generator compatibleEnsures clean, uninterrupted power to protected equipment when generator power is used.Input power factor correctionMinimizes installation costs by enabling the use of smaller generators and cabling.

NetShelter CX 24U Secure Soundproof Server Room in a Box Enclosure - Shock Packaging - WhiteNetshelter CX Enclosure with integrated cooling and noise dampening is ideal for office environments. The cabinet is paired with a shock absorbing pallet, unloading ramp and impact resistant shell. The system has been engineered, tested and approved for secure shipment of fully integrated IT systems

NetShelter SX 48U 750mm Wide x 1200mm Deep Networking Enclosure with Sides WhiteFeature-rich rack enclosure optimized for easy installation, managing cables, integrating power distribution, and maximizing airflow.Includes: Baying hardware, Key(s), Keyed-alike doors and side panels, Leveling feet, Mounting hardware, Pre-installed casters, Side panels, Vertical cable managersCable protection and pass-throughSmooth plastic fingers provide proper bend radius.High density cable managementThe vertical mounting rails are opened up for increased cable access and the roof design has large open areas for cable entry/exit from the enclosure.Improved cable accessMaintain and organize large cable bundles for improved efficiency with open vertical mounting rails and large cable openings in roof.Integrated high density cable managementDecrease installation time while supporting the cabling needs of large networking switches.Optimized enclosure design for side-to-side airflowAirflow management panels, left vertical mounting rail, and side airflow duct kit ensure proper side-to-side airflow to the networking switches from the cold aisle and provide isolation of hot air preventing it from re-entering the cold aisle. Additionally, the front left vertical mounting rail acts as an air block for exhaust air from networking switches.Integrated joining hardware with multiple width enclosure alignmentEnclosures include pre-installed joining hardware to join enclosures in a row and provide additional stability to the enclosure. The pre-installed joining hardware includes holes for joining to an adjacent enclosure at 600mm centers or 24in centers depending upon the floor layout.Enclosure assemble-to-order (ATO) options capableThe Enclosure ATO (Assemble-to-Order) options provide a level of customization for enclosure customers beyond the standard enclosure models. This customization is limited to the assembly of the enclosure itself and does not include additional enclosure mounted components. For example, the enclosure can be assembled without sides, doors, or without sides and doors. Check apc.com for enclosure size options and availability.Pre-installed full-enclosure height rear accessory channelsIntegrated and adjustable rear accessory channel provides zero U mounting locations for toolless accessories. Each channel has two mounting bays to support a combination of up to four accessories such as PDUs and vertical cable organizers. 1070mm (42in), 825mm (32 in), and deep enclosures and networking enclosures include two channels. 1200mm (48in) deep enclosures include four channels. Channels are pre-installed at the factory in the rear of the enclosure but can be moved to other locations of the enclosure along the side brace to resituate cable management where it is needed most.Low-profile castors and adjustable leveling feet from underneath or aboveEnclosures are shipped standard with both leveling feet and castors. Leveling feet can be quickly adjusted through the use of a screwdriver or drill, eliminating the need to reach underneath with a wrench.Split rear doorsSplit rear doors improve access and serviceability to rear of rack mounted equipment. The split rear doors help to maximize floor space. Only 11 inches (279 mm) of clearance is required behind the enclosures to allow for door swing.Special packaging options for shipping rack with equipment pre-rackedEnclosures with shock packaging are standard enclosures with provisions in the packaging design and enclosure assembly for shipping the enclosures with equipment mounted inside. Extensive industry experience with the leading IT manufacturers and most recently certified with Cisco® for pre-racking and shipping Cisco Unified Computing Systems (UCS). Check apc.com for enclosure size options and availability.Adjustable mounting rails with captive hardware and rapid alignmentThe vertical mounting rails can be adjusted in 1/4 in (6.4 mm) increments covering virtually any mounting requirement for IT equipment. Easy alignment feature integrated into the enclosure mounting rail and side brace for quick alignment verification without the use of tools to verify alignment. U positions are numbered front and back for rapid installation of equipment.Schneider Electric Rack Systems CompatibleCompatible with a variety of Schneider Electric rack accessory products to provide the ability to create a complete rack system. Configure rack solutions using industry leading Schneider Electric Design Portal - Small IT Solution Designer configurator complete with verification of product compatibility and useful 3rd party equipment catalog to aid in visualizing your ideal rack solution.Optimized for high capacity cable management systemsNetShelter SX enclosures are optimized for use with high capacity cable management systems that attach to equipment mounting rails inside enclosures aligning with equipment mounting u-spaces and provide channels for routing and managing cabling.Integrated with InfraStruxure productsSchneider Electric cooling, power distribution, and cable management products work seamlessly with IT enclosures to provide a complete infrastructure support system.Vendor-neutral EIA-310 19in Rack Mounting Compatibility GuaranteedVendor-neutral mounting for guaranteed compatibility with all EIA-310 compliant 19"" equipment. The ""Fits Like a Glove"" money back guarantee provides peace of mind that all of your EIA-310-E compliant rack-mount equipment will physically fit in a NetShelter.ConvenienceQuick release doorsFront door can be moved to the opposite side or interchanged with rear doors. Doors are easily removed with simple lift-off design.Perforated front door with curved profilePerforated front and rear doors provide ample ventilation for servers and networking equipment. Front door perforated area is optimized with a curved profile to provide greater surface area and allowance of more perforation coverage and higher perforation rating.Cable access openings with pre-installed brushesLarge cable access slots in the roof provides access for overhead cable egress. The bottom design allows for unobstructed cable access through a raised floor. Roof includes openings with brush strips pre-installed in locations biased towards the front of the enclosure to allow for data cable passthrough and provisions for air containment.Simple SelectionNo need to spend hours choosing from and compiling dozens of part numbers to create a single enclosure. Schneider Electric has made it easy by handling the details and providing complete enclosures with single part numbers.Easily removable cable access roofRoof can be removed with simple pull-pin hinges for access during equipment installation or even with cabling already in place and routed through the cable openings. Once removed the roof is reversible to reposition the larger cable openings for power distribution plugs and connectors.Enclosure adjustment tools and hardware providedAll enclosures are provided standard with hardware bag that includes hardware for mounting IT equipment and tools for simple enclosure adjustment.Equipment mounting rails integrate with patch cabling systemsEquipment mounting rails include zero U mounting holes beside the EIA 19"" mounting space that allow the installation of Data Distribution Cable (DDC) patch systems without taking up any critical equipment U-space. AV and Networking enclosure designs do not include hole locations for integration of DDC cabling. Other 1U, 2U, and rear enclosure zero U options are available for use with these enclosures.Eyebolt support integrated into enclosure frameIntegrated eyebolt holes at the top of the enclosure frame allow the enclosure to be lifted for movement and enclosure placement using eyebolt lifting mechanisms. Refer to enclosure user documentation for detailed specifications on eyebolt requirements and enclosure weight limits.Half-height side panels and option with brush strips for pass-throughHalf-height quick release side panels reduce size and weight for easy handling and access to equipment. Side panels are lockable utilizing a single key with the doors. Now available are side panel options integrated with pass-through holes and brush strips for routing cabling to adjacent racks in a row while still maintaining proper airfow.SafetyIntegrated electrical groundingThe roof, side panels and front and rear doors are grounded to the frame of the enclosure. Eight additional electrical grounding inserts are located on the frame for external grounding.Load CapacityA proven frame design, heavy-gauge mounting rails, and heavy-duty casters provide for a 3750 lb (1700 kg) static (levelling feet) and 2250 lb (1023 kg) dynamic (castor) load ratings (42U-52U). The 12U and 18U have a static and dynamic load capacity of 600 and 900 pounds (272/408kgs) respectively. Enclosures have been tested and approved to be combined with proper bolt down accessories to meet various seismic requirements. Check apc.com for product documentation for specific requirements

Active response controlsMonitors and actively adjusts cooling capacity to ensure proper server inlet temperatures. Through the microprocessor controller, visibility into the operation and health of the unit is provided.Total Cost of OwnershipEconomizationAchieved by utilizing cool ambient air during winter months to take advantage of economizer hours and eliminating compressor operation.Indirect Heat ExchangeA polymer heat exchanger allows the data center and outside airstreams to remain separated, thereby preventing contamination and humidity influences to the data center airstream.Zero White SpaceAll cooling equipment is placed outside the data center, allowing for valuable white space to be fully utilized for IT equipment.Variable speed fansVariable speed fans reduce energy consumption during off-peak cooling periods.Supplemental Mechanical CoolingProvides extra capacity to augment economization, extending annual hours of energy savings.AvailabilityActive response controlsMonitors and actively adjusts cooling capacity to ensure proper server inlet temperatures. Through the microprocessor controller, visibility into the operation and health of the unit is provided.Redundant ComponentsSingle points of failure in the system have redundant compononents to maintain availability and reliability.EconomyGreen RefrigerantEnvironmentally friendly refrigerant that can offer LEED points.Pulse Powered Water Treatment SystemEliminates the use of chemicals in the system, allowing the water to be re-used or drained without harming the environment.AgilityPre-engineered systemAllows for fast design and installationScalable DesignModular design provides scalable solutions to add cooling as demand increases.ServiceabilityOperational ServiceAllows critical components to be maintained/replaced while the system is in operation.Easy service accessAllows for all serviceable components to be replaced/maintained by easily accessible panels/doors.

Active response controlsMonitors and actively adjusts cooling capacity to ensure proper server inlet temperatures. Through the microprocessor controller, visibility into the operation and health of the unit is provided.Total Cost of OwnershipEconomizationAchieved by utilizing cool ambient air during winter months to take advantage of economizer hours and eliminating compressor operation.Indirect Heat ExchangeA polymer heat exchanger allows the data center and outside airstreams to remain separated, thereby preventing contamination and humidity influences to the data center airstream.Zero White SpaceAll cooling equipment is placed outside the data center, allowing for valuable white space to be fully utilized for IT equipment.Variable speed fansVariable speed fans reduce energy consumption during off-peak cooling periods.Supplemental Mechanical CoolingProvides extra capacity to augment economization, extending annual hours of energy savings.AvailabilityActive response controlsMonitors and actively adjusts cooling capacity to ensure proper server inlet temperatures. Through the microprocessor controller, visibility into the operation and health of the unit is provided.Redundant ComponentsSingle points of failure in the system have redundant compononents to maintain availability and reliability.EconomyGreen RefrigerantEnvironmentally friendly refrigerant that can offer LEED points.Pulse Powered Water Treatment SystemEliminates the use of chemicals in the system, allowing the water to be re-used or drained without harming the environment.AgilityPre-engineered systemAllows for fast design and installationScalable DesignModular design provides scalable solutions to add cooling as demand increases.ServiceabilityOperational ServiceAllows critical components to be maintained/replaced while the system is in operation.Easy service accessAllows for all serviceable components to be replaced/maintained by easily accessible panels/doors.

Precision Air Conditioning with maximum flexibility.

The 8-Port Interface Expander provides a total of eight ports and can be daisy-chained to provide 15 ports. It facilitates graceful system shutdown via dependable hardwire connections and allows advanced UPS management. The unit is ideal for ""server farms"" or multiple operating system environments.

Active response controlsMonitors and actively adjusts cooling capacity to ensure proper server inlet temperatures. Through the microprocessor controller, visibility into the operation and health of the unit is provided.Total Cost of OwnershipEconomizationAchieved by utilizing cool ambient air during winter months to take advantage of economizer hours and eliminating compressor operation.Indirect Heat ExchangeA polymer heat exchanger allows the data center and outside airstreams to remain separated, thereby preventing contamination and humidity influences to the data center airstream.Zero White SpaceAll cooling equipment is placed outside the data center, allowing for valuable white space to be fully utilized for IT equipment.Variable speed fansVariable speed fans reduce energy consumption during off-peak cooling periods.Supplemental Mechanical CoolingProvides extra capacity to augment economization, extending annual hours of energy savings.AvailabilityActive response controlsMonitors and actively adjusts cooling capacity to ensure proper server inlet temperatures. Through the microprocessor controller, visibility into the operation and health of the unit is provided.Redundant ComponentsSingle points of failure in the system have redundant compononents to maintain availability and reliability.EconomyGreen RefrigerantEnvironmentally friendly refrigerant that can offer LEED points.Pulse Powered Water Treatment SystemEliminates the use of chemicals in the system, allowing the water to be re-used or drained without harming the environment.AgilityPre-engineered systemAllows for fast design and installationScalable DesignModular design provides scalable solutions to add cooling as demand increases.ServiceabilityOperational ServiceAllows critical components to be maintained/replaced while the system is in operation.Easy service accessAllows for all serviceable components to be replaced/maintained by easily accessible panels/doors.