Showing 860–870 of 1235 results

APC SMT1000J. UPS topology: Line-Interactive, Output power capacity: 1 kVA, Output power: 670 W. AC outlet types: NEMA 5–15P, AC outlets quantity: 8 AC outlet(s). Battery technology: Sealed Lead Acid (VRLA), Battery capacity: 12 Ah, Battery voltage: 12 V. Form factor: Mini Tower, Product color: Black, Display type: LCD. Width: 6.77"" (172 mm), Depth: 17.3"" (439 mm), Height: 8.86"" (225 mm)

Smart-UPS On-LineAPC Smart-UPS RC 2000VA 230VAPC Smart-UPS On-Line, 1400 Watts / 2000 VA, Input 230V / Output 230V , Interface Port DB-9 RS-232, SmartSlot , Extended runtime model , Rack Height 4 U.Automatic internal bypassSupplies utility power to the connected loads in the event of a UPS overload condition or fault.Scalable runtimeAllows additional run time to be quickly added as needed.Intelligent battery managementMaximizes battery performance, life, and reliability through intelligent, precision charging.Hot-swappable batteriesEnsures clean, uninterrupted power to protected equipment while batteries are being replacedAutomatic restart of loads after UPS shutdownAutomatically starts up the connected equipment upon the return of utility power.Network manageableProvides remote management of the UPS over the network.InfraStruXure Manager CompatibleEnables centralized management via the APC InfraStruXure Manager.SmartSlotCustomize UPS capabilities with management cards.LED status indicatorsQuickly understand unit and power status with visual indicators.Serial ConnectivityProvides management of the UPS via a serial port.Plug-and-Play external batteriesEnsures clean, uninterrupted power to the loads when adding extra runtime to the UPS.Rack/Tower convertibleProtects the initial investment in the UPS when migrating from tower to rack-mount environment.Flash upgradeable firmwareInstall maintenance releases of firmware remotely using FTP.User-replaceable batteriesIncreases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)Automatic self-testPeriodic battery self-test ensures early detection of a battery that needs to be replaced.Predicitive failure notificationProvides early-warning fault analysis ensuring proactive component replacement.Disconnected battery notificationWarns when a battery is not available to provide backup power.Audible alarmsProvides notification of changing utility power and UPS conditionsFrequency and voltage regulationGives higher application availability by correcting poor frequency and voltage conditions without using the battery.Power conditioningProtects connected loads from surges, spikes, lightning, and other power disturbances.Input power factor correctionMinimizes installation costs by enabling the use of smaller generators and cabling.Generator compatibleEnsures clean, uninterrupted power to protected equipment when generator power is used.Cold-start capableProvides temporary battery power when the utility power is out.Resettable circuit breakerEasy recovery from overloads; no need to replace a fuse.Safety-agency approvedEnsures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.

Built-in Web/SNMP managementFull-featured management via a Web browser as well as comprehensive management from a Network Management System.Environmental monitoringPrevent equipment failure from a full range of threatening environmental conditions.Audible alarmsProvides notification of changing utility power and UPS power conditionsLCD graphics displayText and mimic diagrams that display modes of operation, system parameters and alarms.Multiple levels of serviceWith the option of packages or individual service components, our services are structured to allow you to pick and choose what you would like APC to do for you.7x24 telephone technical supportOur experienced technical support engineers are available to answer your questions, giving you peace of mind knowing the help you need is there when you need it.Front-access servicingSimplifies installation and UPS maintenance while minimizing space requirements.User-replaceable air filtersEnables quick and simple replacement of air filters.Battery replacement without toolsEnables fast battery replacement, lowering Mean Time to Repair (MTTR).Excellent footprintSmall UPS footprint provides maximum usage of valuable electrical room floorspaceInput power factor correctionMinimizes installation costs by enabling the use of smaller generators and cabling.Temperature-compensated battery chargingProlongs battery life by regulating the charge voltage according to battery temperature.Advanced electrical featuresExcellent power conditioning, very low harmonic distortion through IGBT rectifier, input power factor correction, and high power efficiencyFrequency and voltage regulationGives higher application availability by correcting poor frequency and voltage conditions without using the battery.Generator compatibleEnsures clean, uninterrupted power to protected equipment when generator power is used.Automatic internal bypassSupplies utility power to the connected loads in the event of a UPS power overload or fault.Hot-swappable batteriesEnsures clean, uninterrupted power to protected equipment while batteries are being replacedParallel-capacity capableIncreases total power capacity by using multiple uninterruptible power supplies simultaneously.Dual mains inputIncreases availability by allowing the UPS to be connected to two separate power sources.EU CoC for UPSEnsures that UPSs sold in the EU are highly efficient

APC by Schneider Electric Smart-UPS SRT 10000VA 230V - Rack-mountable - 1.50 Hour Recharge - 3 Minute Stand-by - 480 V Input - 230 V AC Output - Sine Wave - USB - 25 x Battery/Surge Outlet - TAA Compliance

by Schneider Electric Metered-by-Outlet Rack PDU - Metered-by-Outlet - NEMA L6-20P - 21 x IEC 60320 C13, 3 x IEC 60320 C19 - 120 V AC, 230 V AC - 0U - Rack-mountable

Rack PDU 2G, Metered-by-Outlet, ZeroU, 5.7kW, 208V, (21) C13 & (3) C19APC Metered by Outlet Rack Power Distribution Units (PDUs) provide individual outlet power metering to enable energy optimization and circuit protection. Current metering provides real-time remote monitoring of connected loads. Metered by Outlet Rack PDUs provide power utilization data to allow Data Center Managers to make informed decisions on load balancing and right sizing IT environments to lower total cost of ownership. Metered by Outlet Rack PDUs include real power monitoring, a temperature/humidity sensor port, locking IEC receptacles, and ultra low profile circuit breakers. Users can access and configure Metered by Outlet Rack PDUs through secure Web, SNMP, or Telnet Interfaces which are complimented by APC Centralized Management platforms using InfraStruxure Central, Operations, Capacity, and Energy Efficiency.Includes : CAN Port Terminator , Installation guide , Rack Mounting brackets , Safety guide , Serial configuration cableMetering-by-Outlet capabilityIndividual outlet level power metering provides a more granular view of the power distributed to equipment within the enclosure. It also provides the ability to analyze component power trends and perform capacity planning.AgilitySingle input power sourceSupply power from one branch whip to multiple pieces of equipment, conveniently powering rack-mount equipment. Saves time and money during installation by using one branch whip and standard connections.Availability- Alarm ThresholdsDefine alarm thresholds in order to avoid overloaded circuits. Network and visual alarms inform the user of possible problems. (Note: Only available on units with the current monitoring capabilities. Please see SKU specifications for availability)- Network Management CapabilitiesFull-featured network management interfaces that provide standards-based management via Web, SNMP, and Telnet. Allows users to access, configure, and manage rack PDUs from remote locations to save valuable time. Associated with this feature is the ability to quickly and easily upgrade the firmware via network download to installed units for future product enhancements.- Load indicator LEDIndicates overload and warning conditions based on the user-defined alarm thresholds. Alerts users of potential overloaded circuits. (Note: Only available with units with local current monitoring feature)- Local Current Monitoring DisplayThe aggregate current draw per rack PDU is displayed on the unit via a digital display. The local digital display helps installers avoid overloaded circuits by providing a visible warning when the current draw is close to the maximum amperage draw of the strip. (Available on designated SKUs only)- Metering-by-Outlet capabilityIndividual outlet level power metering provides a more granular view of the power distributed to equipment within the enclosure. It also provides the ability to analyze component power trends and perform capacity planning.- Flash UpgradeableQuickly and easily upgrade firmware via network download for future product enhancements. Eliminates the need to replace products already installed in the field when new features are released. (Note: Networked units only)- Integrates with StruxureWare Data Center ExpertAn IT-ready, scalable access monitoring system that collects, organizes, and distributes critical alerts, surveillance video and key information, providing a unified view of complex physical infrastructure environments from anywhere on the network

Metering-by-Outlet capabilityIndividual outlet level power metering provides a more granular view of the power distributed to equipment within the enclosure. It also provides the ability to analyze component power trends and perform capacity planning.Metering-by-Outlet capabilityIndividual outlet level power metering provides a more granular view of the power distributed to equipment within the enclosure. It also provides the ability to analyze component power trends and perform capacity planning.Network Management CapabilitiesFull-featured network management interfaces that provide standards-based management via Web, SNMP, and Telnet. Allows users to access, configure, and manage rack PDUs from remote locations to save valuable time. Associated with this feature is the ability to quickly and easily upgrade the firmware via network download to installed units for future product enhancements.Alarm ThresholdsDefine alarm thresholds in order to avoid overloaded circuits. Network and visual alarms inform the user of possible problems. (Note: Only available on units with the current monitoring capabilities. Please see SKU specifications for availability)Local Current Monitoring DisplayThe aggregate current draw per rack PDU is displayed on the unit via a digital display. The local digital display helps installers avoid overloaded circuits by providing a visible warning when the current draw is close to the maximum amperage draw of the strip. (Available on designated SKUs only)Load indicator LEDIndicates overload and warning conditions based on the user-defined alarm thresholds. Alerts users of potential overloaded circuits. (Note: Only available with units with local current monitoring feature)Flash UpgradeableQuickly and easily upgrade firmware via network download for future product enhancements. Eliminates the need to replace products already installed in the field when new features are released. (Note: Networked units only)Integrates with StruxureWare Data Center ExpertAn IT-ready, scalable access monitoring system that collects, organizes, and distributes critical alerts, surveillance video and key information, providing a unified view of complex physical infrastructure environments from anywhere on the networkSingle input power sourceSupply power from one branch whip to multiple pieces of equipment, conveniently powering rack-mount equipment. Saves time and money during installation by using one branch whip and standard connections.

APC SMT500J. UPS topology: Line-Interactive, Output power capacity: 0.5 kVA, Output power: 360 W. AC outlet types: NEMA 5–15P, AC outlets quantity: 6 AC outlet(s). Battery technology: Sealed Lead Acid (VRLA), Battery capacity: 7.2 Ah, Battery voltage: 12 V. Form factor: Mini Tower, Product color: Black, Display type: LCD. Width: 5.51"" (140 mm), Depth: 14.1"" (359 mm), Height: 6.57"" (167 mm)

by Schneider Electric Replacement Battery Cartridge # 130 - 9000 mAh - 12 V DC - Lead Acid - Sealed/Spill Proof

by Schneider Electric Smart-UPS SRT 5kVA PDU 208V (4) L6-20 - 4 x NEMA L6-20R - 230 V AC - Tower