Showing 0–10 of 1246 results

APC Back-UPS, 390 Watts / 650 VA, Input 120V / Output 120V , Interface Port USBBattery failure notificationProvides early-warning fault analysis on batteries enabling timely preventive maintenanceLED IndicatorsProvide easy-to-read status of the unit and utility power conditions.Resettable circuit breakerEasy recovery from overloads; no need to replace a fuse.Battery-protected and surge-only outletsReserves power capacity and run time for connected equipment that require battery back-up while providing surge only protection for less critical equipmentCold-start capableProvides temporary battery power when the utility power is out.Hot-swappable batteriesEnsures clean, uninterrupted power to protected equipment while batteries are being replacedDisconnected battery notificationWarns when a battery is not available to provide backup power.Dataline Surge ProtectionProvides protection of connected equipment from power surges on the data lines.Automatic self-testPeriodic battery self-test ensures early detection of a battery that needs to be replaced.Audible alarmsProvides notification of changing utility power and UPS conditionsUser-replaceable batteriesIncreases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)USB connectivityProvides management of the UPS via a USB port (not available on all models).Transformer-block spaced outletsProtect equipment with input transformer blocks without blocking access to other receptacles.Intelligent battery managementMaximizes battery performance, life, and reliability through intelligent, precision charging.Safety-agency approvedEnsures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.Lifetime data recovery warrantyProvides peace of mind by providing professional data recovery services in the event data is lost due to the failure of the unit.Battery replacement without toolsAllows quick, easy battery replacement.Back-UPS Features & BenefitsProtectionLightning and Surge ProtectionProtection from surges, spikes and even lightning is guaranteed!Resettable circuit breakerInstead of a hard to find fuse, there is a push-button circuit breaker for easy recovery from an overload or short circuit.ConvenienceAudible alarmsProactively notifies you of changing UPS and utility power conditions.Automatic self-testPeriodic battery self-test ensures early detection of a battery that needs to be replaced.Transformer Block SpacingDesigned to allow the use of up to two transformer block plugs without blocking access to other receptacles.

FeaturesAPC SurgeArrest Essential Multi-Use 6 Outlet with 2 Type-A 1 Type-C Port 4.8A USB Charger 120VBasic Protection Against Power Surges for Computers and ElectronicsCatastrophic Event ProtectionSurgeArrest components such as MOVs and Thermal fuse ensure instantaneous reaction to lightning strikes and wiring faults. If the surge components are damaged due to power spike or over voltage, excess power cannot reach your equipment. Unlike the APC SurgeArrest products, most surge suppressors continue to let power through even after circuits have been damaged, leaving your equipment exposed to other damaging surges.EMI and RFI noise filteringReduces line noise that can cause data loss and keyboard errors.Fail Safe ModeMost other surge suppressors continue to let power through even after their circuits have been damaged, leaving your equipment exposed to future surges. APC's SurgeArrest fail safe, which means that once the circuit of an APC SurgeArrest has been compromised the unit disconnects equipment from the power supply ensuring that no damaging surges reach your equipment.IEEE let-through ratings and regulatory agency complianceAPC surge protectors undergo stringent testing by IEEE, and are awarded ""let-through ratings"", which indicate the maximum voltage level that can possibly reach your equipment after a surge or voltage spike has passed through an electric surge protector. Lower IEEE let-through ratings indicate better protection and performance. The APC Essential SurgeArrest series offers optimal performance with a let-through rating of less than 330V to 500V for North American products, and a rating of less than 15% for products sold worldwide. All APC products comply with local agency safety requirements, including UL in North America and CE/Kema/Gost/C-tick/A-Tick/Telepermit in their respective regions.Lightning and Surge ProtectionTo prevent damage to your equipment from electric power surges and spikes.Noise FilteringAttenuates EMI/RFI line noise that can cause data errors and keyboard lockups, ensuring better performance of protected equipment.Protection Working IndicatorSurgeArrest will warn you if its circuitry has been damaged by heavy strike or power line surge and it is unable to provide 100% protection. If still under warranty, APC will then replace your damaged SurgeArrest free of charge.Right Angle PlugPlug angle allows for equipment and furniture to be placed closer to the wall than with a standard power cord. Reduces cord stress too.Smart charging portA 2.4 amp USB port integrates Smart Charging technology to maximize charging speeds according to the type of device detected.USB charging portsSimultaneously charge mobile devices, including smartphones and tablets.Noise FilteringAttenuates EMI/RFI line noise that can cause data errors and keyboard lockups, ensuring better performance of protected equipment.IEEE let-through ratings and regulatory agency complianceAPC surge protectors undergo stringent testing by IEEE, and are awarded ""let-through ratings"", which indicate the maximum voltage level that can possibly reach your equipment after a surge or voltage spike has passed through an electric surge protector. Lower IEEE let-through ratings indicate better protection and performance. The APC Essential SurgeArrest series offers optimal performance with a let-through rating of less than 330V to 500V for North American products, and a rating of less than 15% for products sold worldwide. All APC products comply with local agency safety requirements, including UL in North America and CE/Kema/Gost/C-tick/A-Tick/Telepermit in their respective regions.Lightning and Surge ProtectionTo prevent damage to your equipment from electric power surges and spikes.Lightning and Surge ProtectionTo prevent damage to your equipment from electric power surges and spikes.Data-line ProtectionProtection of data lines (Ethernet, Coaxial and Phone lines) ensures complete protection of your equipment from surges. It is very important to protect your equipment from “back door” electric surges traveling through data lines, as they can be as damaging to your equipment as surges traveling over power lines.Protection Working IndicatorSurgeArrest will warn you if its circuitry has been damaged by heavy strike or power line surge and it is unable to provide 100% protection. If still under warranty, APC will then replace your damaged SurgeArrest free of charge.Resettable circuit breakerEasy recovery from overloads; no need to replace a fuse. (Not available on Wall Tap SKUs)Fail Safe ModeMost other surge suppressors continue to let power through even after their circuits have been damaged, leaving your equipment exposed to future surges. APC's SurgeArrest fail safe, which means that once the circuit of an APC SurgeArrest has been compromised the unit disconnects equipment from the power supply ensuring that no damaging surges reach your equipment.Catastrophic Event ProtectionSurgeArrest components such as MOVs and Thermal fuse ensure instantaneous reaction to lightning strikes and wiring faults. If the surge components are damaged due to power spike or over voltage, excess power cannot reach your equipment. Unlike the APC SurgeArrest products, most surge suppressors continue to let power through even after circuits have been damaged, leaving your equipment exposed to other damaging surges.Building Wiring Fault IndicatorThis LED informs users of potentially dangerous wiring problems in the wall circuit.Protection Working IndicatorSurgeArrest will warn you if its circuitry has been damaged by heavy strike or power line surge and it is unable to provide 100% protection. If still under warranty, APC will then replace your damaged SurgeArrest free of charge.Fail Safe ModeMost other surge suppressors continue to let power through even after their circuits have been damaged, leaving your equipment exposed to future surges. APC's SurgeArrest fail safe, which means that once the circuit of an APC SurgeArrest has been compromised the unit disconnects equipment from the power supply ensuring that no damaging surges reach your equipment.

FeaturesAPC SurgeArrest Essential Multi-Use 6 Outlet with 2 Type-A 1 Type-C Port 4.8A USB Charger 120VBasic Protection Against Power Surges for Computers and ElectronicsCatastrophic Event ProtectionSurgeArrest components such as MOVs and Thermal fuse ensure instantaneous reaction to lightning strikes and wiring faults. If the surge components are damaged due to power spike or over voltage, excess power cannot reach your equipment. Unlike the APC SurgeArrest products, most surge suppressors continue to let power through even after circuits have been damaged, leaving your equipment exposed to other damaging surges.EMI and RFI noise filteringReduces line noise that can cause data loss and keyboard errors.Fail Safe ModeMost other surge suppressors continue to let power through even after their circuits have been damaged, leaving your equipment exposed to future surges. APC's SurgeArrest fail safe, which means that once the circuit of an APC SurgeArrest has been compromised the unit disconnects equipment from the power supply ensuring that no damaging surges reach your equipment.IEEE let-through ratings and regulatory agency complianceAPC surge protectors undergo stringent testing by IEEE, and are awarded ""let-through ratings"", which indicate the maximum voltage level that can possibly reach your equipment after a surge or voltage spike has passed through an electric surge protector. Lower IEEE let-through ratings indicate better protection and performance. The APC Essential SurgeArrest series offers optimal performance with a let-through rating of less than 330V to 500V for North American products, and a rating of less than 15% for products sold worldwide. All APC products comply with local agency safety requirements, including UL in North America and CE/Kema/Gost/C-tick/A-Tick/Telepermit in their respective regions.Lightning and Surge ProtectionTo prevent damage to your equipment from electric power surges and spikes.Noise FilteringAttenuates EMI/RFI line noise that can cause data errors and keyboard lockups, ensuring better performance of protected equipment.Protection Working IndicatorSurgeArrest will warn you if its circuitry has been damaged by heavy strike or power line surge and it is unable to provide 100% protection. If still under warranty, APC will then replace your damaged SurgeArrest free of charge.Right Angle PlugPlug angle allows for equipment and furniture to be placed closer to the wall than with a standard power cord. Reduces cord stress too.Smart charging portA 2.4 amp USB port integrates Smart Charging technology to maximize charging speeds according to the type of device detected.USB charging portsSimultaneously charge mobile devices, including smartphones and tablets.Noise FilteringAttenuates EMI/RFI line noise that can cause data errors and keyboard lockups, ensuring better performance of protected equipment.IEEE let-through ratings and regulatory agency complianceAPC surge protectors undergo stringent testing by IEEE, and are awarded ""let-through ratings"", which indicate the maximum voltage level that can possibly reach your equipment after a surge or voltage spike has passed through an electric surge protector. Lower IEEE let-through ratings indicate better protection and performance. The APC Essential SurgeArrest series offers optimal performance with a let-through rating of less than 330V to 500V for North American products, and a rating of less than 15% for products sold worldwide. All APC products comply with local agency safety requirements, including UL in North America and CE/Kema/Gost/C-tick/A-Tick/Telepermit in their respective regions.Lightning and Surge ProtectionTo prevent damage to your equipment from electric power surges and spikes.Lightning and Surge ProtectionTo prevent damage to your equipment from electric power surges and spikes.Data-line ProtectionProtection of data lines (Ethernet, Coaxial and Phone lines) ensures complete protection of your equipment from surges. It is very important to protect your equipment from “back door” electric surges traveling through data lines, as they can be as damaging to your equipment as surges traveling over power lines.Protection Working IndicatorSurgeArrest will warn you if its circuitry has been damaged by heavy strike or power line surge and it is unable to provide 100% protection. If still under warranty, APC will then replace your damaged SurgeArrest free of charge.Resettable circuit breakerEasy recovery from overloads; no need to replace a fuse. (Not available on Wall Tap SKUs)Fail Safe ModeMost other surge suppressors continue to let power through even after their circuits have been damaged, leaving your equipment exposed to future surges. APC's SurgeArrest fail safe, which means that once the circuit of an APC SurgeArrest has been compromised the unit disconnects equipment from the power supply ensuring that no damaging surges reach your equipment.Catastrophic Event ProtectionSurgeArrest components such as MOVs and Thermal fuse ensure instantaneous reaction to lightning strikes and wiring faults. If the surge components are damaged due to power spike or over voltage, excess power cannot reach your equipment. Unlike the APC SurgeArrest products, most surge suppressors continue to let power through even after circuits have been damaged, leaving your equipment exposed to other damaging surges.Building Wiring Fault IndicatorThis LED informs users of potentially dangerous wiring problems in the wall circuit.Protection Working IndicatorSurgeArrest will warn you if its circuitry has been damaged by heavy strike or power line surge and it is unable to provide 100% protection. If still under warranty, APC will then replace your damaged SurgeArrest free of charge.Fail Safe ModeMost other surge suppressors continue to let power through even after their circuits have been damaged, leaving your equipment exposed to future surges. APC's SurgeArrest fail safe, which means that once the circuit of an APC SurgeArrest has been compromised the unit disconnects equipment from the power supply ensuring that no damaging surges reach your equipment.

APC APCRBC140 Replacement Battery cartridge #140 - 120 V DC - Sealed Lead Acid - Spill-proof/Maintenance-free - 3 Year Minimum Battery Life - 5 Year Maximum Battery Life - TAA Compliance

Hot-swappable batteriesEnsures clean, uninterrupted power to protected equipment while batteries are being replaced

APC uninterruptible power supply (UPS) 0.7 kVA 420 W.Power-saving outlets - Automatically cuts power to idle equipment to conserve electricity.Disconnected battery notification - Warns when a battery is not available to provide backup power.Boost and Trim Automatic Voltage Regulation (AVR) - Gives higher application availability by correcting low and high voltage conditions without using the battery.LCD graphics display - Text and mimic diagrams that display modes of operation, system parameters and alarms.

APC Back-UPS, 6 Outlets, 425VA, 120VBattery Backup & Surge Protector for Electronics and ComputersAudible alarmsProvides notification of changing utility power and UPS power conditionsBuilding Wiring Fault IndicatorThis LED informs users of potentially dangerous wiring problems in the wall circuit.LED IndicatorsProvide easy-to-read status of the unit and utility power conditions.

APC Replacement Battery Cartridge #17 - UPS battery - 1 x battery - lead acid - black. Genuine APC RBC(TM) are tested and certified for compatibility to restore UPS performance to the original specifications.

APC by Schneider Electric Smart-UPS Li-Ion 500VA Short Depth with SmartConnect UPS (rack-mountable) AC 120 V 400 Watt 500 VA RS-232, USB output connectors: 4 1U.

APC by Schneider Electric Smart-UPS 1500VA Rack-mountable UPS - 3U Rack-mountable - 3 Hour Recharge - 3.03 Minute Stand-by - 120 V AC Input - 120 V AC Output - Serial Port - 6 x NEMA 5-15R