Showing 600–610 of 1390 results

Automatic internal bypass Supplies utility power to the connected loads in the event of a UPS overload condition or fault. Scalable runtime Allows additional run time to be quickly added as needed. Intelligent battery management Maximizes battery performance, life, and reliability through intelligent, precision charging. Hot-swappable batteries Ensures clean, uninterrupted power to protected equipment while batteries are being replaced Automatic restart of loads after UPS shutdown Automatically starts up the connected equipment upon the return of utility power. Temperature-compensated battery charging Prolongs battery life by regulating the charge voltage according to battery temperature. Network manageable Provides remote management of the UPS over the network. InfraStruXure Manager Compatible Enables centralized management via the APC InfraStruXure Manager. SmartSlot Customize UPS capabilities with management cards. LED status indicators Quickly understand unit and power status with visual indicators. Serial Connectivity Provides management of the UPS via a serial port. Plug-and-Play external batteries Ensures clean, uninterrupted power to the loads when adding extra runtime to the UPS. Rack/Tower convertible Protects the initial investment in the UPS when migrating from tower to rack-mount environment. Flash upgradeable firmware Install maintenance releases of firmware remotely using FTP. User-replaceable batteries Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR) Automatic self-test Periodic battery self-test ensures early detection of a battery that needs to be replaced. Predicitive failure notification Provides early-warning fault analysis ensuring proactive component replacement. Disconnected battery notification Warns when a battery is not available to provide backup power. Audible alarms Provides notification of changing utility power and UPS conditions Frequency and voltage regulation Gives higher application availability by correcting poor frequency and voltage conditions without using the battery. Power conditioning Protects connected loads from surges, spikes, lightning, and other power disturbances. Input power factor correction Minimizes installation costs by enabling the use of smaller generators and cabling. Generator compatible Ensures clean, uninterrupted power to protected equipment when generator power is used. Cold-start capable Provides temporary battery power when the utility power is out. Resettable circuit breaker Easy recovery from overloads; no need to replace a fuse. Safety-agency approved Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.

Liebert GXT5 Lithium-Ion Online UPS 6000VA/6000W 120V/208V Rack/Tower UPS - Single-phase UPS | 1.0 Output Power Factor | Lowest T| Full-color LCD Interface| 5-Year Warranty | with Hardwired Output, IntelliSlot with RDU101, Extended Runtime Capability, and Integrated Maintenance Bypass Cabinet (MBC)

CyberPower BP36V60ART2U Smart App Online 1000 and 1500VA UPS External Battery Module - 9000mAh - 12V DC - User Replaceable Sealed Lead Acid Hot-swappable - RoHS Compliance

Vertiv Liebert APS AS3. Output power capacity: 5 kVA, Output power: 4500 W, Input operation voltage (min): 200 V. Battery voltage: 1.67 V, Typical backup time at full load: 300 min. Product color: Black, Cooling type: Active, Safety: IEC/EN/AS 62040-1:2008, UL 1778 4th Ed & CSA 22.2 No. 107.1. Width: 17.3"" (440 mm), Depth: 31.5"" (800 mm), Height: 41.7"" (1060 mm)

APC Symmetra LX, 16000VA/11200W, Input 230V, 400V 3PH/Output 230V, Interface Port DB-9 RS-232, Smart-Slot, Extended runtime model Includes: CD with software, Documentation CD, Installation Guide, User Manual, Web/SNMP Management Card General Features: Audible Alarms, Automatic internal bypass, Automatic restart of loads after UPS shutdown, Automatic self-test, Battery modules connected in parallel, Cold-start capable, Configurable for N+1 internal redundancy, Disconnected battery notification, Field-replaceable power distribution panel, Frequency and voltage regulation, Generator Compatible, Hot-swappable batteries, Hot-swappable intelligence modules, Hot-swappable power modules, InfraStruXure Manager Compatible, Input Power Factor Correction, Intelligent Battery Management, LCD display, Manageable external batteries, Modular design, Network manageable, Plug-and-Play external batteries, Power conditioning, Power Modules connected in parallel, Predictive failure notification, Programmable Frequency, Rack/Tower Convertible, Redundant Intelligence Modules, Removable input/output wiring tray, Resettable circuit breakers, Safety-agency approved, Scalable Power Capacity, Scalable runtime, Shippable with modules installed, SmartSlot, User-replaceable batteries, User-replaceable intelligence modules, User-replaceable power modules.

Boost and Trim Automatic Voltage Regulation (AVR)Gives higher application availability by correcting low and high voltage conditions without using the battery.Intelligent battery managementMaximizes battery performance, life, and reliability through intelligent, precision charging.Power conditioningProtects connected loads from surges, spikes, lightning, and other power disturbances.Temperature-compensated battery chargingProlongs battery life by regulating the charge voltage according to battery temperature.Automatic restart of loads after UPS shutdownAutomatically starts up the connected equipment upon the return of utility power.Automatic self-testPeriodic battery self-test ensures early detection of a battery that needs to be replaced.Cold-start capableProvides temporary battery power when the utility power is out.Disconnected battery notificationWarns when a battery is not available to provide backup power.Network manageableProvides remote management of the UPS over the network.Audible alarmsActively let you know if the unit is on battery, if the battery is low or if there is an overload condition.LED status indicatorsQuickly understand unit and power status with visual indicators.Serial ConnectivityProvides management of the UPS via a serial port.USB connectivityProvides management of the UPS via a USB port (not available on all models).Disconnected battery notificationWarns when a battery is not available to provide backup power.InfraStruXure Manager CompatibleEnables centralized management via the APC InfraStruXure® Manager.User-replaceable batteriesIncreases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR).Hot-swappable batteriesEnsures clean, uninterrupted power to protected equipment while batteries are being replaced.Predictive failure notificationProvides early-warning fault analysis ensuring proactive component replacement.Resettable circuit breakersEnables a quick recovery from overload events.Adjustable voltage-transfer pointsMaximizes useful battery life by widening the input voltage window or tightening the output voltage regulation.Adjustable voltage sensitivityProvides the ability to adapt the UPS for optimal performance in specific power environments or generator applications.Field-replaceable power distribution panelEnsures compatibility with equipment that has different plug types.

The Liebert GXT5 UPS in an on-line double conversion USP solution which offers premium power outage protection and continuous power conditioning in a compact and flexible deployment system. This single phase UPS operates with a high power efficiency and it is ideally suited to protect critical infrastructure in both centralized and edge of network applications.

APC Smart-UPS, 700VA/450W, Input 120V/Output 120V, Interface Port DB-9 RS-232.

Vertiv Liebert GXT5 UPS - 6kVA/6kW 230V | Online Rack Tower Energy Star - Double Conversion | 5U | Built-in RDU101 Card| Color/Graphic LCD| 3-Year Warranty - TAA Compliance

Vertiv Liebert APS AS6. Output power capacity: 20 kVA, Output power: 18000 W, Input operation voltage (min): 200 V. Battery voltage: 1.67 V, Typical backup time at full load: 300 min. Product color: Black, Cooling type: Active, Safety: UL 1778 4th Ed and CSA 22.2 No. 107.1. Width: 17.3"" (440 mm), Depth: 33.5"" (850 mm), Height: 38.2"" (970 mm)