Showing 1110–1120 of 1390 results

The SVT10KX SmartOnline® SVTX Series 3-Phase 380/400/415V 10kVA 9kW On-Line Double-Conversion UPS with IGBT technology provides battery backup and AC power protection against power disturbances that can damage electronics or destroy data. It’s recommended for critical IT or corporate infrastructure, telecom, LAN/WAN, security and emergency, financial and light industrial applications.The SVT10KX’s VFI design allows continuous operation at any supported voltage at either 50 or 60 Hz. Zero transfer time to battery mode ensures no disruption to the attached loads. Automatic and Manual Bypass keeps connected equipment powered even during overloads and UPS maintenance.IGBT inverter technology produces output power with less than 2% total harmonic distortion (THD) to keep connected equipment functioning at its peak. A 3:1 crest factor safely supports a variety of loads, even those with wildly fluctuating power demands.Managing the SVT10KX is simplified through the interactive front-panel LCD interface, which displays critical operating conditions and diagnostic data, such as load levels, available runtime, alarm status, battery charge, and voltage and frequency values. Four LEDs indicate bypass, line, battery and fault modes. A built-in card slot supports WEBCARDLX or RELAYCARDSV for network interface and remote monitoring and control. The SVT10KX’s reduced size and small footprint save valuable space.

The SV40KM2P4B SmartOnline® SV Series 40kVA 3-Phase On-Line Double-Conversion UPS System delivers true scalability and offers the highest level of secure, uninterrupted power protection. Featuring a modular, scalable design with high-efficiency voltage and frequency independent (VFI) operation, this on-line UPS system is ideal for protecting a variety of critical IT systems.The SV40KM2P4B includes pre-installed input, bypass and output breakers, as well as a static transfer switch (STS), two 20kVA SV20PM power modules and four SVBM battery modules. Space is included for up to two additional user-installable SV20PM power modules. External ±120VDC battery options, such as BP240V370, are also available from Tripp Lite for even more extended runtime.The Java-free HTML5-based WEBCARDLX interface enables full remote access for site power and UPS status monitoring, configuration, control and email notifications via secure web browser, SNMP, telnet or SSH. It supports 10/100 Mbps auto-sensing for optimum communication with an Ethernet network.With up to 92% efficiency in standard mode and up to 99% efficiency in optional economy mode, this 40kVA UPS system helps you reduce operating and cooling costs. Automatic and manual bypass options keep connected equipment operational during routine maintenance or critical power module failure. Front-panel display offers full UPS condition and status reporting.40kVA 36kW 3-Phase Medium-Chassis UPS System- Supports 208/120V or 220/127V AC 50/60Hz Wye 4-wire plus Earth hardwire input and output wiring- Dual hardwire input design enables operation from up to 2 power sources- Network-grade sine-wave AC output with 1% output voltage regulation and less than 1% output total harmonic distortion- Tested to UL 1778 (U.S.), CSA (Canada) and NOM (Mexico) standards- High 0.9 power factor for maximum power to the connected loadPre-Installed WEBCARDLX Network Interface- Allows full remote access for power monitoring, configuration, control and email notifications via secure web browser, SNMP, telnet or SSH- Supports 10/100 Mbps auto-sensing for communication with an Ethernet network- Optional EnviroSense2 sensors (sold separately) enable site monitoring of temperature, humidity and contact-closure status- No Java requiredModular, Scalable Design for Maximum Flexibility- Modular configuration with hot-swappable power modules and batteries enables easy, fast maintenance with zero downtime- Open slots for up to 2 additional 20kVA SV20PM power modules accommodate increased capacity up to 80kVA (or 60kVA with N+1 fault tolerance)- Supports external ±120VDC battery options for even more extended runtimeOptional Economy Mode- Up to 99% efficient in optional economy mode to lower operating and cooling costsWide Input/Narrow Output Voltage Operating Range- Enables full continuous online operation during brownouts as low as 121V and overvoltages up to 253V- Regulates output voltage within 1% of the selected nominal output voltage in on-line double-conversion modeAdvanced IGBT Inverter with Digital Signal Processor (DSP) Technology- Provides for less than 2% input total harmonic distortion (THDi) to support 1:1 generator sizing and prevent the need to oversize generator systems relative to UPS capacityAutomatic and Manual Bypass Options- Keep connected equipment operational during routine maintenance or critical power module failure

The SV20KS1P1B SmartOnline® SV Series 20kVA Small-Frame 3-Phase On-Line Double-Conversion UPS System delivers true scalability and offers the highest level of secure, uninterrupted power protection. Featuring a modular, scalable design with high-efficiency voltage and frequency independent (VFI) operation, this on-line UPS system with a high 0.9 power factor is ideal for protecting a variety of critical IT systems.The SV20KS1P1B includes pre-installed input, bypass and output breakers, as well as a static transfer switch (STS), one 20kVA SV20PM power module and one SVBM battery module. Space is included for up to two additional user-installable SV20PM power modules and two SVBM internal battery modules. External ±120VDC battery options, such as BP240V370, are also available from Tripp Lite for even more extended runtime.The Java-free HTML5-based WEBCARDLX interface enables full remote access for site power and UPS status monitoring, configuration, control and email notifications via secure web browser, SNMP, telnet or SSH. It supports 10/100 Mbps auto-sensing for optimum communication with an Ethernet network.With up to 92% efficiency in standard mode and up to 98% efficiency in optional economy mode, this 20kVA UPS system helps you reduce operating and cooling costs. Automatic and manual bypass options keep connected equipment operational during routine maintenance or critical power module failure. Front-panel display offers full UPS condition and status reporting.20kVA 18kW 3-Phase Small-Chassis UPS System- Supports 208/120V or 220/127V AC 50/60Hz Wye 4-wire plus Earth hardwire input and output wiring- Dual hardwire input design enables operation from up to 2 power sources- Network-grade sine-wave AC output with 1% output voltage regulation and less than 2% output total harmonic distortion- Tested to UL 1778 (U.S.), CSA (Canada) and NOM (Mexico) standards- High 0.9 power factor offers higher kW output than lower-rated competing legacy designsPre-Installed WEBCARDLX Network Interface- Allows full remote access for power monitoring, configuration, control and email notifications via secure web browser, SNMP, telnet or SSH- Supports 10/100 Mbps auto-sensing for communication with an Ethernet network- Optional EnviroSense2 sensors (sold separately) enable site monitoring of temperature, humidity and contact-closure status- No Java requiredModular, Scalable Design for Maximum Flexibility- Modular configuration with hot-swappable power and battery modules enables easy, fast maintenance with zero downtime- Open slots for up to 2 additional 20kVA SV20PM power modules accommodate increased capacity up to 60kVA (or 40kVA with N+1 fault tolerance)- Open slots for up to 2 additional SVBM internal batteries for extended runtime- External battery pack options available for even more extended runtimeOptional Economy Mode- Up to 98% efficient in optional economy mode to lower operating and cooling costsWide Input/Narrow Output Voltage Operating Range- Enables full continuous online operation during brownouts as low as 121V and overvoltages up to 253V- Regulates output voltage within 1% of the selected nominal output voltage in on-line double-conversion modeAdvanced IGBT Inverter with Digital Signal Processor (DSP) Technology- Provides for less than 3% input total harmonic distortion (THDi) to support 1:1 generator sizing and prevent the need to oversize generator systems relative to UPS capacityAutomatic and Manual Bypass Options- Keep connected equipment operational during routine maintenance or critical power module failure

The SV40KS2P3B SmartOnline® SV Series 40kVA Small-Frame 3-Phase On-Line Double-Conversion UPS System delivers true scalability and offers the highest level of secure, uninterrupted power protection. Featuring a modular, scalable design with high-efficiency voltage and frequency independent (VFI) operation, this on-line UPS system with a high 0.9 power factor is ideal for protecting a variety of critical IT systems.The SV40KS2P3B includes pre-installed input, bypass and output breakers, as well as a static transfer switch (STS), two 20kVA SV20PM power modules and three SVBM battery modules. Space is included for one additional user-installable SV20PM power module. External ±120VDC battery options, such as BP240V370, are also available from Tripp Lite for even more extended runtime.The Java-free HTML5-based WEBCARDLX interface enables full remote access for site power and UPS status monitoring, configuration, control and email notifications via secure web browser, SNMP, telnet or SSH. It supports 10/100 Mbps auto-sensing for optimum communication with an Ethernet network.With up to 92% efficiency in standard mode and up to 98% efficiency in optional economy mode, this 40kVA UPS system helps you reduce operating and cooling costs. Automatic and manual bypass options keep connected equipment operational during routine maintenance or critical power module failure. Front-panel display offers full UPS condition and status reporting.40kVA 36kW 3-Phase Small-Chassis UPS System- Supports 208/120V or 220/127V AC 50/60Hz Wye 4-wire plus Earth hardwire input and output wiring- Dual hardwire input design enables operation from up to 2 power sources- Network-grade sine-wave AC output with 1% output voltage regulation and less than 2% output total harmonic distortion- Tested to UL 1778 (U.S.), CSA (Canada) and NOM (Mexico) standards- High 0.9 power factor offers higher kW output than lower-rated competing legacy designsPre-Installed WEBCARDLX Network Interface- Allows full remote access for power monitoring, configuration, control and email notifications via secure web browser, SNMP, telnet or SSH- Supports 10/100 Mbps auto-sensing for communication with an Ethernet network- Optional EnviroSense2 sensors (sold separately) enable site monitoring of temperature, humidity and contact-closure status- No Java requiredModular, Scalable Design for Maximum Flexibility- Modular configuration with hot-swappable power and battery modules enables easy, fast maintenance with zero downtime- Open slot for 1 additional 20kVA SV20PM power module accommodates increased capacity up to 60kVA (or 40kVA with N+1 fault tolerance)- Open slot for 1 additional SVBM internal battery for extended runtimeExternal battery pack options available for even more extended runtimeOptional Economy Mode- Up to 98% efficiency in optional economy mode to lower operating and cooling costsWide Input/Narrow Output Voltage Operating Range- Enables full continuous online operation during brownouts as low as 121V and overvoltages up to 253V- Regulates output voltage within 1% of the selected nominal output voltage in on-line double-conversion modeAdvanced IGBT Inverter with Digital Signal Processor (DSP) Technology- Provides for less than 3% input total harmonic distortion (THDi) to support 1:1 generator sizing and prevent the need to oversize generator systems relative to UPS capacityAutomatic and Manual Bypass Options- Keep connected equipment operational during routine maintenance or critical power module failure