Showing 520–530 of 912 results

APC uninterruptible power supply (UPS) Standby (Offline) 0.65 kVA 390 W 8 AC outlet(s)Audible alarms Provides notification of changing utility power and UPS power conditions Automatic self-test Periodic battery self-test ensures early detection of a battery that needs to be replaced. Battery failure notification Provides early-warning fault analysis on batteries enabling timely preventive maintenance Battery replacement without tools Enables fast battery replacement, lowering Mean Time to Repair (MTTR). Battery-protected and surge-only outlets Reserves power capacity and run time for connected equipment that require UPS battery back-up while providing surge only protection for less critical equipment Cold-start capable Provides temporary battery power when the utility power is out. Dataline surge protection Provides protection of connected equipment from power surges on the data lines. Disconnected battery notification Warns when a battery is not available to provide backup power. Hot-swappable batteries Ensures clean, uninterrupted power to protected equipment while batteries are being replaced Intelligent battery management Maximizes battery performance, life, and reliability through intelligent, precision charging. Resettable circuit breaker Easy recovery from overloads; no need to replace a fuse. (Not available on Wall Tap SKUs) Safety-agency approved The UPS is UL1778 Listed Transformer-block spaced outlets Protect equipment with input transformer blocks without blocking access to other receptacles USB connectivity Provides management of the UPS via a USB port (not available on all models). User-replaceable batteries Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)

APC Back-UPS. UPS topology: Standby (Offline), Output power capacity: 0.7 kVA, Output power: 405 W. AC outlet types: Type F. Battery technology: Sealed Lead Acid (VRLA), Battery capacity: 9 Ah, Battery capacity: 86 VAh. Form factor: Compact, Product color: Black, Cable length: 72"" (1.83 m). Width: 8.82"" (224 mm), Depth: 12.2"" (311 mm), Height: 3.5"" (89 mm)

User-replaceable batteriesIncreases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)Flexible DesignAvailable in a wide range of configurations to suit any operating environmentMultiple mounting methodsAllows for standardization on one product for use in different environments.Plug-and-Play external batteriesEnsures clean, uninterrupted power to the loads when adding extra runtime to the UPS.Automatic restart of loads after UPS shutdownAutomatically starts up the connected equipment upon the return of utility power.Automatic self-testPeriodic battery self-test ensures early detection of a battery that needs to be replaced.Cold-start capableProvides temporary battery power when the utility power is out.Power conditioningProtects connected loads from surges, spikes, lightning, and other power disturbances.Wide input voltage rangeDesigned for harsh electrical environments to save battery life.

APC Smart-UPS 750VA LCD RM 2U 120V with L5-15PReliable network power protection designed for deployment in retail and open access environments.Includes : CD with software , Documentation CD , Installation guide , Rack Mounting support rails , Smart UPS signalling RS-232 cable , USB cable - Cold-start capableProvides temporary battery power when the utility power is out.- Energy meterProvides actual kilowatt hours of usage for energy conscious users.- Green modePatent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.- High online efficiencyReduces utlility costs, generates less heat.- Intuitive LCD interfaceProvides clear and accurate information in multiple languages with the ability to configure the UPS locally with easy to use navigation keys.- Predictive replace battery dateDynamically provides the month and year when battery replacement is recommended to aide in long term maintenance planning.- Pure sine wave output on batterySimulates utility power to provide the highest degree of compatibility for active PFC (power factor corrected) servers and sensitive electronics.- Single switched outlet groupSingle outlet group that may be controlled separately from the UPS for discrete reboot of hung devices, sequenced on/off and non-critical load shedding.- SmartSlotCustomize UPS capabilities with management cards.- Temperature-compensated battery chargingProlongs battery life by regulating the charge voltage according to battery temperature.Availability- Automatic restart of loads after UPS shutdownAutomatically starts up the connected equipment upon the return of utility power.- Automatic self-testPeriodic battery self-test ensures early detection of a battery that needs to be replaced.- Pure sine wave output on batterySimulates utility power to provide the highest degree of compatibility for active PFC (power factor corrected) servers and sensitive electronics.- Temperature-compensated battery chargingProlongs battery life by regulating the charge voltage according to battery temperature.- Power conditioningProtects connected loads from surges, spikes, lightning, and other power disturbances.Manageability- Intelligent battery managementMaximizes battery performance, life, and reliability through intelligent, precision charging.- LED IndicatorsProvide easy-to-read status of the unit and utility power conditions.- USB connectivityProvides management of the UPS via a USB port (not available on all models).- Serial connectivityProvides management of the UPS via a serial port.- SmartSlotCustomize UPS capabilities with management cards.Serviceability- Technical supportOur experienced technical support engineers are available to answer your questions, giving you peace of mind knowing the help you need is there when you need it.- Easy to installInnovative design allows for fast, easy installation by almost anybody.- Hot-swappable batteriesEnsures clean, uninterrupted power to protected equipment while batteries are being replaced- User-replaceable batteriesIncreases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)

Dual mains input: Increases availability by allowing the UPS to be connected to two separate power sources. Adjustable voltage sensitivity: Provides the ability to adapt the UPS for optimal performance in specific power environments or generator applications. Frequency and voltage regulation: Gives higher application availability by correcting poor frequency and voltage conditions without using the battery. Generator compatible: Ensures clean, uninterrupted power to protected equipment when generator power is used. Parallel-capacity capable: Increases total power capacity by using multiple uninterruptible power supplies simultaneously. Parallel-redundant capable: Power the connected equipment with multiple uninterruptible power supplies to increase system redundancy.

Dual mains input:Increases availability by allowing the UPS to be connected to two separate power sources.Adjustable voltage sensitivity:Provides the ability to adapt the UPS for optimal performance in specific power environments or generator applications.Frequency and voltage regulation:Gives higher application availability by correcting poor frequency and voltage conditions without using the battery.Generator compatible:Ensures clean, uninterrupted power to protected equipment when generator power is used.Parallel-capacity capable:Increases total power capacity by using multiple uninterruptible power supplies simultaneously.Parallel-redundant capable:Power the connected equipment with multiple uninterruptible power supplies to increase system redundancy

Dual mains input:Increases availability by allowing the UPS to be connected to two separate power sources.Adjustable voltage sensitivity:Provides the ability to adapt the UPS for optimal performance in specific power environments or generator applications.Frequency and voltage regulation:Gives higher application availability by correcting poor frequency and voltage conditions without using the battery.Generator compatible:Ensures clean, uninterrupted power to protected equipment when generator power is used.Parallel-capacity capable:Increases total power capacity by using multiple uninterruptible power supplies simultaneously.Parallel-redundant capable:Power the connected equipment with multiple uninterruptible power supplies to increase system redundancy

UPS and three UL 924 listed matching battery cubicles with a minimum of 90 minutes battery operation. Dual mains input: Increases availability by allowing the UPS to be connected to two separate power sources. Adjustable voltage sensitivity: Provides the ability to adapt the UPS for optimal performance in specific power environments or generator applications. Frequency and voltage regulation: Gives higher application availability by correcting poor frequency and voltage conditions without using the battery. Generator compatible: Ensures clean, uninterrupted power to protected equipment when generator power is used. Parallel-capacity capable: Increases total power capacity by using multiple uninterruptible power supplies simultaneously. Parallel-redundant capable: Power the connected equipment with multiple uninterruptible power supplies to increase system redundancy

Intuitive LCD interfaceProvides clear and accurate information in multiple languages with the ability to configure the UPS locally with easy to use navigation keys.Predictive replace battery dateDynamically provides the month and year when battery replacement is recommended to aide in long term maintenance planning.Green modePatent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.Energy meterProvides actual kilowatt hours of usage for energy conscious users.Outlet group controlTurn on/off, reboot or shut down select outlet groups to save dispatching technicians to remote locations (for UPSs with switched outlet groups).Sequenced shutdown and restartConfigure select outlet groups to shut down and turn on in a pre-determined order (for UPSs with switched outlet groups).Pure sine wave output on batterySimulates utility power to provide the highest degree of compatibility for active PFC (power factor corrected) servers and sensitive electronics.Single switched outlet groupSingle outlet group that may be controlled separately from the UPS for discrete reboot of hung devices, sequenced on/off and non-critical load shedding.Sine wave outputEliminates humming and heat generated when powering tubelights and fans.StruxureWare Central compatibleEnables centralized management via StruxureWare Central.Battery failure notificationProvides early-warning fault analysis on batteries enabling timely preventive maintenanceLED IndicatorsProvide easy-to-read status of the unit and utility power conditions.Hot-swappable batteriesEnsures clean, uninterrupted power to protected equipment while batteries are being replacedDisconnected battery notificationWarns when a battery is not available to provide backup power.Automatic self-testPeriodic battery self-test ensures early detection of a battery that needs to be replaced.Automatic restart of loads after UPS shutdownAutomatically starts up the connected equipment upon the return of utility power.Adjustable voltage-transfer pointsMaximizes useful battery life by widening the input voltage window or tightening the output voltage regulation.Adjustable voltage sensitivityProvides the ability to adapt the UPS for optimal performance in specific power environments or generator applications.Audible alarmsProvides notification of changing utility power and UPS conditionsUser-replaceable batteriesIncreases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)USB connectivityProvides management of the UPS via a USB port (not available on all models).Serial ConnectivityProvides management of the UPS via a serial port.Temperature-compensated battery chargingProlongs battery life by regulating the charge voltage according to battery temperature.Boost and Trim Automatic Voltage Regulation (AVR)Gives higher application availability by correcting low and high voltage conditions without using the battery (not available on all models).Intelligent battery managementMaximizes battery performance, life, and reliability through intelligent, precision charging.Safety-agency approvedEnsures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.Network manageableProvides remote management of the UPS over the network.Predicitive failure notificationProvides early-warning fault analysis ensuring proactive component replacement.

Intuitive LCD interfaceProvides clear and accurate information in multiple languages with the ability to configure the UPS locally with easy to use navigation keys.High frequency designReduces or eliminates bulky transformers resulting in lighter units for ease of handling.Predictive replace battery dateDynamically provides the month and year when battery replacement is recommended to aide in long term maintenance planning.Green modePatent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.Energy meterProvides actual kilowatt hours of usage for energy conscious users.Single switched outlet groupSingle outlet group that may be controlled separately from the UPS for discrete reboot of hung devices, sequenced on/off and non-critical load shedding.High online efficiencyReduces utlility costs, generates less heat.EPOAttach the device to an Emergency Power Off (EPO) system so that power can be turned off in an emergency situation.Pure sinewave battery backupPrevents interruptions, lost pre-sets, missed DVR recordings, lost multimedia server data and premature projector bulb wear and tear when the power goes out.SmartSlotCustomize UPS capabilities with management cards.Field-replaceable power distribution panelEnsures compatibility with equipment that has different plug types.Temperature-compensated battery chargingProlongs battery life by regulating the charge voltage according to battery temperature.