Showing 4840–4850 of 8579 results

Jabra LINK EHS 14201-19 is an adapter that allows you to answer / end a call by pressing buttons on the headset. By connecting to the AUX port of PRO9450 / PRO925 / MOTION OFFICE via this adapter and the corresponding phone, you can answer / end call to the phone by button operation of the headset. It is convenient to answer the phone without missing a call even in a place away from the telephone.

Transmits a 4K HDMI A/V Signal to 4 HDMI Displays SimultaneouslyRecommended for 4K digital signage in classrooms, churches, offices, restaurants, bars, trade shows, etc.Distributes A/V signals up to 15 ft. (4.6 m) when used with standard 28 AWG HDMI cableSupports UHD resolutions up to 4K @ 60 Hz for crystal-clear videoSupports HDCP 2.2 and EDID compliant to ensure compatibility with latest A/V hardwareCascade up to 3 levels of splitters together to increase the number of connected monitors up to 64Supports the Most Up-To-Date Features and FormatsSupports High Dynamic Range (HDR) for richer contrast and expanded color accuracyFull 3DDTS-HD, Dolby TrueHD, Dolby Digital Plus and LPCM 7.1-channel surround sound audio36-bit Deep Color (12 bits per channel)Video amplifier bandwidth of 600 MHz/6 Gbps per channel (18 Gbps total)Lip sync pass-through, xvYCC and x.vColorEasy to Use Almost AnywherePlug-and-play operation with no software required for easy, immediate installationSupports desktop use or wall-mounting using included hardwarePower supply includes international plug adapters (North America, Europe, U.K. and Australia)TAA-CompliantCompliant with the Federal Trade Agreements Act (TAA) for GSA Schedule purchases

2-port transmitter and dual receivers extend an HDMI signal via Cat5e/6/6a cable to 2 projectors, monitors or TVs up to 100 ft. away. Recommended for digital signs, classrooms, churches, offices and retail settings.- Built-in Power over Cable (PoC) technology powers the receiver- Supports high-definition video resolutions up to 1080p (@ 60 Hz)- Supports 7.1-channel surround sound audio- HDCP and 3D compliant- Plug and play—no software or drivers to installThe B126-2P2M-POC 2-Port HDMI over Cat5/Cat6 Extender Kit includes a two-port transmitter and two low-profile receivers that work in tandem to extend an HDMI audio/video signal to two projectors, monitors or televisions. The kit is recommended for digital signs, trade shows, classrooms, churches, offices, retail settings and other applications where the source is located farther than conventional cables allow. HDMI cable (see Tripp Lite’s P568-Series) connects the audio/video source, such as a Blu-ray™ player, to the transmitter’s HDMI port. Cat5e/6/6a cable connects the transmitter to the receivers’ RJ45 ports (for best results, use 24 AWG solid-wire Cat6 cable, such as Tripp Lite’s N202-Series). The receivers plug directly into the displays’ HDMI input ports. Built-in PoC technology powers the receivers over Cat5e/6/6a cable, so no external power supply on the display side is needed.The B126-2P2M-POC can extend a high-definition 1080p (at 60 Hz) signal up to 50 feet and a 1080i signal up to 100 feet. In addition to crystal-clear video, the B126-2P2M-POC delivers full, rich audio up to 7.1-channel surround sound (multi-channel or PCM) and supports 3D and HDCP standards. Easy to set up with no software or drivers to install. Transmitter mounts to a wall, rack or pole using the included hardware. Complies with the Federal Trade Agreements Act (TAA) for GSA Schedule purchases.Splits and Extends High-Definition HDMI Audio/Video Signals- 2-port transmitter extends HDMI A/V signal to 2 low-profile receivers- Recommended for digital signs, trade shows, classrooms, churches, offices, retail settings and other HDMI A/V applications- Extends a 1080p (@ 60 Hz) signal up to 50 ft. from source- Extends a 1080i signal up to 100 ft. from source- Supports 7.1-channel surround sound (multi-channel or PCM) audio- HDCP and 3D compliantEasy to Set Up and Use- Plug-and-play engineering—no software or drivers to download and install- Transmitter connects to source using HDMI cable, such as Tripp Lite’s P568-Series- Transmitter and receivers connect with Cat5e/6/6a cable (for best results, use Tripp Lite’s N202-Series)- LEDs indicate when units are receiving power or an HDMI signal- Mounting hardware included for installing transmitter on a wall, rack or poleTAA-CompliantComplies with the Federal Trade Agreements Act (TAA) for GSA Schedule purchases

The Designer Contour Electrol is designed with a stylish curved aluminum extruded case and has dimensions of only 4-5/8"" high and 4-3/32"" deep, making the Designer Contour small enough to fit into any installation.Standard with a white powder coated finish, or choose black or graphite for a contemporary look.An optional choice of seven veneer finishes is also available for the front cover of the screen case for a warm and elegant look.Veneers from left to right (top row) Honey Maple, Medium Oak, Heritage Walnut, Mahogany, (bottom row) Light Oak, Natural Walnut, Cherry.Screen operation is controlled by three-button wireless infrared remote transmitter and Decors style three position low voltage wall switch and includes a 10' power cord.

the Advantage® Ceiling Recessed Electric Screen Series Is Designed With Ceiling Trim In Place, To Conceal The Rough Opening Eliminating The Need To Complete Additional Trim Work Once The Screen Is Installed. Its Two-stage Installation Option Affords The Screen Case To Be Installed During The Rough-in Construction Stage, And The Screen Surface Assembly During The Finishing Stage. Sliding Installation Brackets Allow Mounting Flexibility For Easy Attachment Of The Screen Housing To The Structure Above The Drop Ceiling.

Seamless in all sizes, the tab tensioning system offers the flattest possible viewing surface for a retractable screen.Constructed of a two piece aluminum extruded case the Tensioned Cosmopolitan includes mounting brackets for wall or ceiling mount installations.Motor in-the-roller design ensures a silent operation and the front access panel of the case allows easy access.Two piece case standard black powder coated. White available upon request.An optional choice of seven veneer finishes are also available for the front cover of the screen case for a warm, elegant look.