Showing 380–390 of 822 results

The VC840 HDMI to 3G/HD/SD SDI Converter provides a professional way to exchange high definition signals in real time. The SDI and HDMI signal conversion is 100% digital and guarantees no loss of quality for both the audio and video transmission. The VC840 provides 2 low jitter SDI outputs for dual display. The VC840 is the most dependable way to convert signals with confidence when monitoring in any post or broadcast application.- Converts an HDMI input signal to 3G/HD/SD-SDI formats in real time while avoiding transformation loss for both audio and video signals- Supports additional analog stereo audio and coaxial digital audio- HDMI (Deep Color)- LED indication of power and signal status- Supports an SDI distance of up to 90M (3G-SDI), 150M (HDSDI) or 300M (SD-SDI) of RG6- Supported SDI formats:- SD-SDI (SMPTE 259M, up to 270Mbps)- HD-SDI (SMPTE 292M, 296M, up to 1.485Gbps)- 3G-SDI (SMPTE 424M, 425M level A, up to 2.97Gbps)- Video Support:- 525i@59.96, 625i@50- 720p@50/59.94/60- 1080i@50/59.94/60- 1080p@23.97/24/25/29.97/30/50/59.94/60- 2048 x 1080- Supports 8 audio channels @ 48kHz rate- Offers 2 low-jitter SDI outputs for dual display- Features automatic detection of 3G/HD/SD-SDI signals- Reclocking SDI signals for cascading and thus longer transmission- Locking power connector for secure communications- Selectable EDID settings and EDID learning mode

StarTech.com VGA and Audio over Cat5 Extender. Type: AV transmitter & receiver, Cable types supported: Cat5e, Cat6, Maximum transfer distance: 5905.5"" (150 m). Audio input: 2 x 3.5 mm, Audio output: 2 x 3.5 mm. Operating voltage: 12 V, Output current: 0.5 A, Power consumption (typical): 6 W. Receiver dimensions (WxDxH): 3.27 x 2.36 x 0.787"" (83 x 60 x 20 mm), Receiver weight: 6.38 oz (181 g), Transmitter dimensions (WxDxH): 3.27 x 2.36 x 0.787"" (83 x 60 x 20 mm). Package dimensions (WxDxH): 3.62 x 9.53 x 7.4"" (92 x 242 x 188 mm), Package weight: 2.65 lbs (1.2 kg)

StarTech.com HDMI over CAT6 Extender - 4K 60Hz - 330ft / 100m - IR Support - HDMI Balun - 4K Video over CAT6 (ST121HD20L) - Maintains 4K picture quality up to 330ft away over CAT6 cabling - Supports all known HDMI audio formats - Extend your 4K HDMI signal in small or large environments - Optimize the placement of your demo stations at tradeshows - Compatible w/ HDCP 2.2

Deploy HDMI over LAN and get a video over IP solution that’s scalable and features intuitive control that’s ideal for your video wall or other digital signage applicationThis HDMI® over IP extender gives you the flexibility to locate digital signage displays where you need them. Using your local network to extend a 4K HDMI signal, you can seamlessly distribute video to multiple displays from multiple source devices, making it easy to position your displays, or create a video wall.You can add additional receivers (sold separately) to distribute your HDMI signal to multiple locations. You can also create a video wall and combine your video source across multiple displays.The IP receiver also features RS-232 extension which enables you to add a remote serial-operated device.Versatile configuration optionsIn a point-to-multipoint setup, you can connect the HDMI over IP kit through a Gigabit LAN portal. You can also connect one or several sources (transmitters) to multiple displays (receivers) over your network, using a Gigabit Ethernet switch with IGMP.For further scalability, you can combine up to 16 total extender kits. The extender also features a separate 3.5 mm audio source that enables you to switch between the native HDMI audio and a separate 3.5 mm audio source, so you can distribute a single audio source to multiple remote locations over IP.For smaller-scale applications, you can use the extender kit as a point-to-point video extender by connecting the transmitter and receiver units directly over Cat5 or Cat6 cabling up to 330 feet (100 meters). In this configuration, two independent 3.5 mm audio source can also be extended to separate 3.5 mm speaker systems.Ultra HD 4K resolution at 30HzThis HDMI over IP kit delivers astonishing 4K UHD video to your remote 4K displays. With support for 4K, you can achieve an output resolution of up to 3840 x 2160p at 30Hz, which enables you to extend a 4K video source to multiple remote locations -- perfect for distribution throughout large buildings such as schools, hospitals, shopping centers or areas. The extender also works at lower resolutions such as 1080p or 720p.Manage your video distribution from your mobile deviceThis HDMI distribution kit features an easy-to-use video control software app to manage your IP video distribution. The app is simple to set up, with automatic hardware detection, and lets you switch video sources for each remote display. You can also create and manage a video wall, for an impressive digital signage presentation.The software is available on iOS for your iPhone or iPad, and Android™ for your smartphone or tablet.Professional, cost-effective, simple installationThe HDMI over IP extender kit includes optional slot shelf mounting hardware for a tidy installation. Plus, because the extender uses standard non-proprietary CAT5e or CAT6 cable, it eliminates both the expense and hassle of running specialized cables.Download the StarTech.com Video Control software.Note: For best performance, a managed network switch with IGMP is recommended for more than one transmitter, or more than four receivers, Non-managed network switches will also limit the performance of other devices on your network. Support for Jumboframes must be enabled to distribute 4K video.The ST12MHDLAN4K is This product is TAA compliant and backed by a Startech.com 2-year warranty with free lifetime technical support.The StarTech.com Advantage