Showing 0–9 of 9 results

Precision regulated DC power supplies are ideal for commercial/land-mobile, ham and CB radios, test bench supplies, base stations, tape players and amplifiers. Designed for years of reliable service and superior performance, they efficiently convert 120 volts AC into 13.8 volts DC (+/-0.5V). The Trim Line Series of DC power supplies offers a low-profile design with a footprint that matches the most popular radios on the market, such as Motorola, Radius, GE Monogram Series and EF Johnson models.

Tripp Lite 300W Medical-Grade Mobile Power Retrofit Kit with 36 Amp-hour Battery and 3 Outlets - RoHS, TAA Compliance

Tripp Lite 1500W RV Inverter / Charger with Hardwire Input / Output 12VDC 120VAC - 12V DC - 120V AC - Continuous Power:1500W - TAA Compliance

Tripp Lite by Eaton 1-Outlet Personal Surge Protector, Direct Plug-In, 600 Joules, 2 Diagnostic LEDs Receptacles: 1 x NEMA 5-15R - 600J

Tripp Lite PR7. Total power: 96.6 W. Compatible products: Motorola, Radius, GE Monogram Series & EF Johnson, Country of origin: Taiwan. Product color: Black. Weight: 6.37 lbs (2.89 kg). Package width: 9.3"" (236.2 mm), Package depth: 6.7"" (170.2 mm), Package height: 4.2"" (106.7 mm)

75W DC power supply provides primary or redundant power to your media converter installation.Powers Your Tripp Lite N785-CH12 12-Port Media Converter ChassisThis 75-watt DC power supply works with the Tripp Lite N785-CH12 media converter chassis to provide primary or redundant power. The N785-CH12 comes with a pre-installed AC power supply, but you can swap it out for the N785-CH75W-DC if you prefer DC power. This DC power supply can be used with any DC power source up to 48V 3A. A second DC power supply is also recommended to provide redundant power that helps prevent unwanted and expensive downtime. Note: Only one type of power supply should be used with the N785-CH12. Do not mix DC and AC power supplies.

Precision regulated DC power supplies are ideal for commercial/land-mobile, ham and CB radios, test bench supplies, base stations, tape players and amplifiers. Designed for years of reliable service and superior performance, they efficiently convert 120 volts AC into 13.8 volts DC (+/-0.5V). The Trim Line Series of DC power supplies offers a low-profile design with a footprint that matches the most popular radios on the market, such as Motorola, Radius, GE Monogram Series and EF Johnson models. Compliant with the Federal Trade Agreements Act (TAA) for GSA Schedule purchases.

- 12V DC or 120VAC input; 120VAC output; 2 GFCI protected outlets- 750 watts continuous, 1125 watts OverPower and 1500 watts- DoubleBoost inverter output- 3 stage, 45A / 11A selectable wet / gel / AGM cell battery charger- Built-in Isobar® premium AC surge protection and Auto Transfer- Switching option for battery backup / UPS operation- Meets OSHA requirementsTripp Lite UT750UL Utility Work Truck Inverter / Charger are the quiet alternative to gas generators with no fumes, fuel or noise. It provides equipment with utility or generator supplied AC electricity filtered through premium ISOBAR surge protection. This DC-to-AC inverter with automatic line to battery transfer and integrated charging system serves as an extended run UPS, a standalone power source or an automotive inverter suitable for rugged work site applications. Supplies up to 750 watts of continuous 120V AC power from any 12V DC battery or automotive DC source. OverPower inverter output feature temporarily provides up to 150% of the continuous output for 1-60 minutes, and DoubleBoost inverter out put feature delivers up to 200% of continuous output for up to 10 seconds, providing the extra power needed to start heavy-duty tools and motorized equipment. When AC cable is connected to a live wall socket, commercial power passes through to connected equipment and the battery set is recharged via 3 stage selectable 11/45Amp charging system. In UPS mode, the APS system responds to blackouts and voltage fluctuations with a near instantaneous automatic transfer to battery derived AC output. A set of high current DC input terminals is included for simple installation (user supplies batteries and cabling – see owners manual for recommendations). Passes sine wave utility or generator power during battery charging and UPS line power operation, plus efficient PWM sine wave AC output in inverter and UPS backup modes. Reliable large transformer design, with frequency control, powers resistive electronic loads or large inductive motors, compressors and other devices with high current needs on startup. Included is the APSRM4 wired remote power switch with full status LED’s, which provides remote power inverter on/off switching and continuous status information. The UT750UL supports an unlimited amount of runtime with user-supplied batteries.

75W AC power supply provides primary or redundant power to your media converter installation.Powers Your Tripp Lite N785-CH12 12-Port Media Converter ChassisThis 75-watt AC power supply works with the Tripp Lite N785-CH12 media converter chassis to provide redundant power that helps prevent unwanted and expensive downtime. One N785-CH75W-AC comes pre-installed with the N785-CH12 to provide primary power. An additional power supply is also recommended as a replacement part.