Showing 20–30 of 603 results

1U Vented Cantilever Rack Shelf Secures Non-Rack Equipment in Your Data CenterThis SmartRack® fixed shelf supports monitors, wireless access points, tower units and other IT equipment not typically stored in a rack. Made from heavy-duty cold-rolled steel with a durable black powder-coated finish, the SRSHELF2P1USHRT has a maximum load capacity of 40 pounds (18 kilograms). It mounts easily into 1U of space in an EIA-standard 19-inch 2-post or 4-post enclosure or open frame rack using the included hardware.Maximizes Rack Space and Saves Desk or Floor Space in a Busy OfficeThe steel shelf is seven inches (17.8 centimeters) deep for organizing network and other non-rack equipment in your small office or server room. The vented surface allows generous airflow to keep your equipment cool and functioning at its peak. You may mount two SRSHELF2P1USHRT shelves back-to-back in your rack to create a deeper shelf in the same 1U rack space.

2U Horizontal Cable Manager Keeps Your Rack Looking Neat and OrganizedEasy to mount on either the front or rear of your rack cabinet or open frame rack, the SmartRack® SRCABLERING2UHD neatly organizes fiber optic, copper and coax cable bundles. This 2U horizontal manager maintains proper bend radius to eliminate stress on the cables connecting your network devices. Open rings allow convenient access to cabling for routing and separation of bundles. The cable manager is made from rugged cold-rolled steel to increase the total weight capacity. All hardware is included for installation on an EIA-standard 19-inch rack.

SmartRack® SRCASTER is a rolling caster kit used to maneuver rack enclosures, wall-mounts and 4-post open frame racks to their desired location. The kit includes four casters (550 pounds or 249.5 kilograms per caster rating), installation guide and mounting hardware. The kit comes standard with all floor standing rack enclosures (48/45/42/25/12U).Note: Casters are intended for minor position adjustments and are not designed for moving racks over long distances.

6 ft. Vertical Cable Manager Keeps Your Rack Looking Neat and OrganizedEasy to mount along the side of your rack cabinet or open frame rack, the SmartRack® SRCABLERINGVRTF neatly organizes fiber optic, copper and coax cable bundles. Consisting of two three-foot (0.9-meter) sections for flexibility in mounting, this vertical manager maintains proper bend radius to eliminate stress on the cables connecting your network devices. Open rings allow convenient access to cabling for routing and separation of bundles. The cable manager is made from high-visibility yellow steel to help you identify its contents in a crowded rack. No hardware is required for toolless 0U vertical installation in an EIA-standard 19-inch rack.

Wall-Mount Bracket Is the Ideal Alternative to a Full-Size Rack CabinetIf you don’t have enough equipment to justify the purchase of a full-size rack or you don’t have enough space for one, this SmartRack® bracket is the ideal alternative for your home office or small business. Made from heavy-duty laser-cut 14-gauge cold-rolled steel with a durable black powder-coated finish, this 12U wall-mount bracket attaches to the wall of your back office or closet with the included mounting screws.Hinged Bracket Supports EIA-Standard 19 in. Rack EquipmentThe SRWO12UBRKTSHEL houses 12U of compatible 19-inch rack components, including EIA-compliant switches and patch panels by any manufacturer, up to 14.75 inches deep. The 12U wall-mount bracket is hinged to allow open, unrestricted access to equipment and cabling from either the left or right side. Maximum load capacity is 150 pounds (68 kilograms).Rear Cutout Eases Cable InstallationsThe 12U bracket features an open cutout in the rear that allows for cable feeds through the wall to streamline installations and reduce cable clutter. The laser-cut metal bracket’s surfaces and edges are smooth to reduce wear on cable jackets and patch panel equipment.Space-Saving Shelf Allows Easy Storage of Non-Rack ComponentsInstall the steel shelf at the top or bottom of the bracket to hold equipment that is not rack-mountable, including Ethernet routers, wireless access points, tower UPS systems and mini switches. No separate rack-mount shelf accessory is needed.Easy Mounting with the Included HardwareRear keyhole mounting slots are 16 inches apart to align with standard wall-stud placement. Stamped horizontal reinforcement ribs on the back of the bracket provide extra stability. The 12U wall-mount bracket comes with 12-24 mounting screws for installing the bracket and rack equipment.

Increases the Cable Management Capability of Your 45U Rack CabinetThese single-width rack accessories install in your enclosure using the included hardware to help you reorganize and improve the management of network and power cables. Keyhole slots provide toolless mounting for 0U PDUs, cables and other accessory items that need to be vertically installed in your rack. Two single-width vertical cable management bars with a classic black finish to match your rack are included. They are compatible with all SmartRack 45U floor-standing racks, including wide, deep and expandable models.

Thunderbolt 4 Hub Turns Your Laptop or Computer into a 4-Port 8K Workstationversatile MTB4-HUB3-01 dramatically expands the potential of your desktop computer or laptop by adding four ports to its Thunderbolt 4 or Thunderbolt 3 port. It goes further than a USB-C hub, offering three Thunderbolt 4 ports that support 8K video and 40 Gbps data transfer speeds. All three ports are backward compatible with Thunderbolt 3 and USB-C monitors as well. A USB 3.2 Gen 2 port allows speeds up to 10 Gbps.Thunderbolt 4 Supports Blisteringly Fast 40 Gbps Data Transfer SpeedsThe Thunderbolt 4 hub supports bidirectional speeds up to 40 Gbps, which is eight times faster than USB 3.0, four times faster than Thunderbolt 1 and twice as fast as Thunderbolt 2. With dual 20 Gbps channels moving data both directions at the same time, the MTB4-HUB3-01 is perfectly suited for video playback or Zoom meetings on one monitor and video editing or document sharing on another. Because Thunderbolt 4 supports minimum PCIe (PCI Express) data rates of 32 Gbps (twice that of Thunderbolt 3), transferring large RAW video, Photoshop images or CAD files takes hardly any time at all.Transmits Crystal-Clear 8K and 4K Video for Professional Editing and Digital SignageWhen connected to a Thunderbolt 4 source, the hub supports one 8K monitor (7680 x 4320 at 30 Hz) or two 4K monitors (3840 x 2160 at 60 Hz). With dual monitors, you can display the same image on both, extend your host desktop across them, or combine all screens into one large display as a video wall. The Thunderbolt 4 ports also accept Thunderbolt 3 and USB-C monitors for trade shows and video presentations. Note: Source device must support DisplayPort 1.3 to achieve 8K resolution.Cascade up to 6 Levels of Thunderbolt Devices The MTB4-HUB3-01 acts as the first level in a daisychain installation and can cascade an additional five levels vertically, with many more devices connecting horizontally. The dock supports 40 Gbps Thunderbolt 4 data transmission that is shared among the three Thunderbolt ports and all connected peripherals and displays.USB Port Connects Thumb Drives and Other USB PeripheralsThe USB-A hub port supports USB 3.2 Gen 2 speeds up to 10 Gbps, which is twice as fast as USB 3.2 Gen 1. It accepts high-speed USB peripherals, such as external hard drives, giving you access to essential data storage. It also supports downstream charging of mobile devices up to 900mA (0.9A) and is backward compatible with previous USB generations.Smart Power Function Allocates Power to Connected Devices Efficiently and SafelyThe hub features a 20V 5A (100W) power input and can provide 60W to charge the source device, such as a Chromebook, MacBook Pro or iPad Pro. Each Thunderbolt 4 port supports up to 15W downstream charging for connected devices. The USB-A port supports 0.9A. The hub determines how much power is required by each port and allocates the power accordingly. Note: This hub does not support PD Charging.Ready to Use Right from the Package, So You Can Plug and Play ImmediatelyThe plug-and-play Thunderbolt 4 hub is specifically designed for Windows devices compatible with Thunderbolt 4 or macOS devices running Thunderbolt 3. It requires no extra software to be downloaded and installed. Simply connect the included Thunderbolt 4 cable to your computer’s Thunderbolt port.

USB-C to Serial Adapter for Use with All RS-232 Serial DevicesThis Keyspan® adapter lets you connect a legacy DB9/RS-232 serial device to the USB-C port on your computer, laptop, tablet, Chromebook or MacBook. It works with switches, routers, modems, barcode scanners, GPS units, digital cameras, point-of-sale devices, lab equipment, network storage devices and other devices with a 9-pin serial port.Ready to Begin Transferring Data Almost ImmediatelyThe included 3-ft. (0.91 m) detachable cable supports data transfer rates up to 230 Kbps, which doubles the speed of built-in PC serial ports. The USB-C to DB9 adapter also works with any USB-C cable up to 16 feet. LEDs on the unit indicate status and data activity. No external power is needed. The unit weighs just two ounces and is easy to carry in a pocket, purse, backpack or laptop bag for instant file transfers where needed.Compatible with Major Operating SystemsThis USB-C to serial adapter works with Windows (up to 11), Mac OS X (up to Ventura 13.3.1) applications. It's easy to upgrade via free software downloads. Windows line monitor and data trace software are included. Supports both 32-bit and 64-bit systems. The driver for newest operating systems are available for download on the Technical Support page.TAA-Compliant for GSA Schedule PurchasesThe USA-19HS-C is compliant with the Federal Trade Agreements Act (TAA), which makes it eligible for GSA (General Services Administration) Schedule and other federal procurement contracts.

2U Vented Rack Shelf Secures Non-Rack Equipment in Your Data CenterThis SmartRack® center-mount shelf supports monitors, wireless access points, tower units and other IT equipment not typically stored in a rack. Made from heavy-duty cold-rolled steel with a durable black powder-coated finish, the SRSHELF2PCENTER has a maximum load capacity of 100 pounds (45 kgs). It mounts easily into 2U of space in a standard 3-inch-deep 2-post open frame rack using the included hardware.Maximizes Rack Space and Saves Desk or Floor Space in a Busy OfficeThe steel shelf is 21.5 inches (55 cm) deep for organizing network and other non-rack equipment in your small office or server room. The vented surface allows generous airflow to keep your equipment cool and functioning at its peak.

Extra-Wide 6 ft. Vertical Cable Manager Keeps Your Rack Looking Neat and OrganizedEasy to mount along the side of your rack cabinet or open frame rack, the SmartRack® SRCABLEVRT3FC neatly organizes fiber optic, copper and coax cable bundles. This vertical manager maintains proper bend radius to eliminate stress on the cables connecting your network devices. Fingers on either side allow convenient access to cabling for routing and separation of bundles. The high-capacity three-inch (7.6-centimeter) width allows the installation and routing of large fiber cable bundles. The cable manager is made from high-visibility yellow steel to help you identify its contents in a crowded rack. 2 ft. Sections Allow Flexibility in MountingThe SRCABLEVRT3FC comes in three two-foot (0.6-meter) sections to give you more installation options. No hardware is required for toolless 0U vertical installation in an EIA-standard 19-inch rack. In addition to standard rack enclosures, this cable manager is ideal for open frame racks and larger cabinets from 42U to 48U.