Showing 790–800 of 2798 results

The P582-015-HD-V2A DisplayPort 1.2a to HDMI Active Adapter Cable (M/M) connects a DisplayPort-enabled PC or Mac to the HDMI port on a 4K monitor, projector or television. With a DisplayPort male connector on one end and a gold-plated high-grip HDMI male connector on the other, this cable requires no separate power adapter. It lets you continue using an existing 4K HDMI display without the extra expense of buying a new DisplayPort monitor.Recommended for displaying crystal-clear video on a large monitor or digital sign, this cable supports UHD video resolutions up to 4K at 60 Hz (3840 x 2160) as specified in HDMI 2.0. The P582-015-HD-V2A also supports rich, full audio (if your DisplayPort card supports audio passthrough) and the latest HDCP 2.2 standards.Because it's an active adapter, the 15-foot (4.6-meter) P582-015-HD-V2A is compatible with Single-Mode and Dual-Mode (DP++) DisplayPort output. It's perfect for use with graphics cards, such as AMD Eyefinity, that don't output DP++ signals.The corrosion-resistant gold-plated HDMI connector and contacts provide maximum conductivity and minimize data loss. Its special high-grip plug prevents a loose or accidentally disconnected cable from causing picture loss. Integral strain relief with ridges on each end gives the cable extra flexibility, reduces stress, and helps the cable and connectors move freely without cracking.

Thin, Flat flexible cable for confined spacesMeets Category 6 cabling standardsHigh-quality copper wire and a shortened body plug designFeature molded connectors with integral strain reliefEIA/TIA 568 CompliantUp to 1Gbps transfer rates

Connect a computer with a Mini-Displayport video out port to an HDMI-enabled TVSupports video resolutions up to 1920 x 1080 (1080p)Supports both digital video and audioHDCP compatibleThis product is a passive adapter and requires thatthe connected computer has a DP++ (DisplayPort ++) dual-mode port

The P582-025 DisplayPort to HDMI Adapter Cable connects a DisplayPort computer to the HDMI port on a monitor, projector or television. With a DisplayPort male connector on one end and an HDMI male connector on the other, this cable requires no separate adapter. It lets you use your existing HDMI display instead of buying a new DisplayPort monitor.Ideal for displaying crystal-clear video on a large monitor or digital sign, this 25-ft. (7.62 m) cable supports high-definition video resolutions up to 1920 x 1080 (1080p), as well as rich, full audio (if your DisplayPort card supports audio passthrough) and HDCP (High-Definition Content Protection). This in-line passive adapter is designed for use with Dual-Mode (DP++) DisplayPort graphics cards.Nickel-plated connectors and gold-plated contacts ensure excellent conductivity. Integral strain relief ensures the cable and molded connectors last a long time. Flexible PVC jacket makes the cable easy to install in tight corners and other areas where space is restricted.

Send High-Quality Mini DisplayPort v1.2 Video Signals to a DVI DisplayConnects Mini DisplayPort (or Thunderbolt) computer to DVI-enabled monitor, projector or TVIdeal for displaying video on large monitor or digital signMini DisplayPort and DVI-D male connectorsNo separate adapter requiredVibrant, Superior Video QualitySupports HD video resolutions up to 1920 x 1080 (1080p)Converts Single-Mode and Dual-Mode (DP++) Mini DisplayPort outputPerfect for use with graphics cards, such as AMD Eyefinity, that don’t output DP++ signalsSuperior Materials for Superior PerformanceDouble shielding with foil and braid for maximum EMI/RFI protectionGold-plated connectors and contacts for excellent conductivityIntegral strain relief for long life

Manufactured from 62.5/125 duplex (zipcord) fiberPVC jacketLength: 5-meter. connectors: LC connector on each endInsertion loss testing performed on every connector (0.2db typical) and provided with cableBeveled edge on ends of glass makes insertion of plug a breezeFiber made from glass (not a polymer)Duplex multimode fiber is most commonly used in LAN applications where links are typically 10-ft. (3.05 m) or lessFiber optic distributed data interface (FDDI) ratedOFNR (riser rated)

100 GbE Cable Supports Higher Bandwidths Needed for Data NetworkingAs the amount of traffic in data networks grows, so does the need for devices and fiber cables to support higher bandwidths in cloud services, hyperscale data centers, telecom applications and equipment OEM companies. This duplex multimode 50/125 OM4 cable is an ideal choice for 100G Ethernet applications up to 30 meters (98.4 feet) at 850 nm. It is also backward compatible with 10 Gb, 25 Gb and 40 Gb networks, so you can future-proof your current application for an eventual upgrade to 100 Gb.Armored Cable Provides Great Flexibility and DurabilityThe N821-30M-AQ-AR can be run anywhere and does not need to be in conduit. Built-in flexible stainless steel and robust Aramid yarn protect the optical fibers more effectively than standard fiber optic cables do. The rugged armored tubing allows optical fiber to be installed in the most hazardous areas, including environments with excessive dust, oil, gas and moisture. This fiber cable provides low insertion loss and high return loss.Aqua Jacket Helps Avoid Misidentification That Can Cause Costly DowntimeThe OM4-rated cable has an aqua-colored jacket to identify it as multimode in a crowded patch panel or switch and prevent it from becoming accidentally disconnected. The round low-smoke zero-halogen (LSZH) jacket limits the amount of toxic smoke emitted in case of combustion, making it suitable for poorly ventilated areas.

Power cord splitter allows 2 devices with C14 inlets to share one AC power input cord and one NEMA 5-15R outlet.- Connects 2 devices to one AC outlet to save space and reduce cable clutter- Recommended for powering dual computers, monitors or other compatible peripherals- Y splitter power cable is ideal replacement for worn-out or missing cable- NEMA 5-15P plug connects to AC power; C13 plugs connect to devices’ C14 inletsY-Style Power Cord Splitter Connects 2 Devices with C14 Inlets to One AC OutletThis computer power cord splitter allows two devices with C14 power inlets to share one AC input cord and one NEMA 5-15R outlet. By connecting two devices to one outlet, the power cord splitter frees up space in a PDU or surge protector and helps reduce cable clutter. You can also free up valuable PDU space by connecting bulky power adapters to this splitter, preventing the adapters from blocking adjacent outlets.Dual IEC Cable Powers a Wide Variety of Essential ElectronicsWith this PC power splitter, a single NEMA 5-15R outlet can power two devices, such as computers, monitors, printers, instrument amplifiers and other equipment compatible with a C13 connector. Ideal for areas where AC outlets are limited, such as rack cabinets, this dual IEC power cable is compatible with Tripp Lite power and extension cords.

C14-to-C13 Power Cable for Network Devices That Require a Heavy-Gauge ConnectionThis IEC-320-C14 to IEC-320-C13 cable features 14 AWG wire suitable for high power connections, making it a reliable solution for large server applications that require a higher-rated, heavier-gauge cable. This C14 male to C13 female cord can be used to connect a computer, server, monitor or drive to a UPS system or PDU or replace or upgrade the standard power cord provided by the device's manufacturer. The 2-ft. (0.61 m) length helps reduce cable clutter and minimize the risk of tripping.Color-Coded to Avoid Misidentification That Can Cause Costly DowntimeThis computer power extension cord features a blue SJT jacket and fully molded blue ends. The color-coding allows easy, fast identification in a crowded rack or workstation and helps prevent the cable from becoming inadvertently disconnected.

5M (16.4-ft.) Black 24Awg SFP+ High Speed Passive Copper 10Gbps CableFully compliant to MSA SFF-8431 specificationEquivalent to Cisco SFP-H10GB-CU5M (See the Support tab on this web page for additional cross references)Use in 10Gbps Ethernet and Fibre Channel applications100ohm Twinaxial cable, Diecast metal shells, pull-to-release latchingSupport for 1x, 2x, 4x and 8x Fiber Channel data ratesHot-Pluggable SFP 20PIN footprintLow power consumption