Showing 210–220 of 414 results

SmartRack® SRBOLTDOWN provides extreme stabilization and security for cabinets and racks. The bolt-down kit enables SmartRack to be secured to a concrete floor. SRBOLTDOWN includes four concrete inserts, four bolts and four fender washers.Technical Notes: We recommend using a 1/2-inch concrete drill. Hole must be 4.5 inches to 4.75 inches deep. Mark the hole, drill the hole, then tap the anchor into the hole. Thread the bolt into the anchor a few threads only. Tap the bolt with a hammer (with anchor attached) until it bottoms out in the hole, then tighten the bolt.

Tripp Lite Exhaust Fan for Rack Enclosure Wiring Closet 475 CFM, NEMA 5-15P Input, Black - 7" Height x 12.9" Width x 17.3" Depth - Black - TAA Compliance

Tripp Lite 42U Rack Enclosure Server Cabinet Colocation Kit Dual 20URM - TAA Compliance

Tripp Lite Fan Tray for 19 in. Racks 1U 9 120V High-Performance Fans 864 CFM C14 Inlet - 9 Fan - 1U - 19" - 864 CFM - Upflow Air Discharge Pattern - TAA Compliance

The SmartRack® SRPAGODAROOF is the ideal safety accessory for rack enclosures. SPAGODAROOF is a drip-resistant roof that fits all standard width (600 mm) and depth (1050 mm) racks (25U, 42U, 45U and 48U). It is designed to keep water and debris from falling directly into the rack in the event of a ceiling leak.

Increase or Decrease the Depth of Your Server Rack by 4 in.This SmartRack® rail-depth adapter kit lets you mount rack equipment so that it either extends four inches (10.2 centimeters) past the front vertical mounting rails or recesses four inches within the rails. This would benefit you, for instance, if you mounted extra-deep equipment that protruded out the front of the rack and prevented you from closing the door. Or it can allow you easier access to front cabling and help cut down on cable strain. Easy Installation Using the Included HardwareThe SRRAILDPTH1U comes with two steel mounting brackets made from heavy-duty steel with a black powder-coated finish to mesh seamlessly with your rack. Connect the 1U extension brackets to the front rails using the included hardware. Position the brackets outside the rails to increase rack depth or inside the rails to decrease rack depth. Then mount the equipment to the brackets. The SRRAILDPTH1U is compatible with EIA-standard 19-inch open frame racks and enclosures.

The SmartRack® SRSHELF2PX2 is a 2U cantilever-mount fixed shelf. The cantilever shelf supports monitors and other equipment with a 120-pound (54-kilogram) capacity. The shelf is compatible with 2- or 4-post rack enclosure cabinets. The SRSHELF2PX2 is 36 inches in depth. Required mounting hardware is included.

SmartRack® SRSHELF4PKYBD is a sliding keyboard shelf designed for all standard 17-inch keyboards. The SRSHELF4PKYBD is an extendable shelf to allow quick access to the keyboard or for storage when not in use. It is designed for 4-post rack-mounting and has a 25-pound (11.3-kilogram) weight capacity. Required mounting hardware is included.

Tripp Lite 26U Wall Mount Rack Enclosure Server Cabinet w Hinged Acrylic Window - For LAN Switch, Patch Panel - 26U Rack Height x 19" Rack Width x 11.42" Rack Depth - Wall Mountable - Black Powder Coat - Acrylic, Steel - 250 lb Maximum Weight Capacity - 250 lb Static/Stationary Weight Capacity - TAA Compliance

The SRW6UW SmartRack® 6U Low-Profile Switch-Depth Wall-Mount Rack Enclosure Cabinet is designed to house EIA-standard 19-inch rack equipment in home and office network wiring closets, retail locations, classrooms and other areas with limited floor space where you need equipment to be secure, organized and out of the way. Constructed from heavy-duty steel with a durable white powder-coated finish, the cabinet has a maximum load capacity of 200 pounds (90.7 kilograms).The side panels and front door lock securely to help prevent damage, tampering or theft. The front, top, bottom and removable side panels are vented, which allows air to flow freely and keep equipment cool. The reversible front door can open left or right by rotating the cabinet 180° before mounting. Convenient top and bottom ports allow easy cable routing.The SRW6UW comes fully assembled and ready to mount to the wall, or use the optional SRCASTER rolling caster kit (sold separately) to make it a mobile rack. Square and 12-24 threaded mounting holes and numbered rack spaces make equipment installation easy. The vertical mounting rails adjust in 7/8-inch increments to accommodate equipment up to 16.5 inches deep, such as network switches and patch panels.