Showing 10–17 of 17 results

Black Box LHC040A-R4 MultiPower Mini 10-100 Media Converter - TAA Compliance

Black Box LGC135A-R3 10/100/1000-Mbps Copper to 1000-Mbps Fiber SFP. MultiPower Miniature Gigabit Ethernet

Black Box Gb ETH IND PoE MED CONV 10/100/1000Mbps COP 100/1000Mbps FBR SFP - Network (RJ-45) - 1x PoE (RJ-45) Ports - Gigabit Ethernet - 10/100/1000Base-TX, 1000Base-X - 1 x Expansion Slots - SFP (mini-GBIC) - 1 x SFP Slots - DIN Rail Mountable, Panel-mountable, Wall Mountable - TAA Compliant

extend Your Network With Fiber The Fast Ethernet Industrial Media Converter Provides A Cost-effective Way To Add Fiber To Your Existing Network Infrastructure. It Converts 10/100base-t(x) To 100basefx With Ease. Additionally, This Media Converter Supports Mdi/mdix Auto Detection, So You Do Not Need To Use Crossover Wires. Designed For The Toughest Environments This Media Converter Provides Consistent Network Performance In The Harshest Work Environments On Earth. It Features Rigid Ip-30 Housing, An Operating Temperature Range Of -40° To 158° F And Has Dual Power Inputs That Each Accept A Wide Voltage Range (12 To 48 Vdc). Supports Link Fault Pass-through When One Side Of Your Network Link Fails, The Other Side Continues Transmitting Packets And Waits For A Response That Never Arrives From The Disconnected Side. Link Fault Pass-through Forces The Active Link To Shut Down As Soon As It Notices The Other Link Has Failed, Giving The Application Software A Chance To Fix The Issue. This Maximizes The Uptime Of Your Network.

these Din Rail-mountable, Plug-and-play Devices Offer Multiple Power Options And Are Perfect For Harsh Environments Where You Need To Convert Copper To Fiber. Equipped With All The Features Of Our Miniature Media Converters, These Ultra-compact, Plug-and-play Converters Offer Additional Power Options, Including Support For The Ieee 802.3af Power Over Ethernet (poe) Standard. Plus, Industrial Multipower Media Converters Are Designed For Use In Harsh Industrial Environments. In All, There Are Four Different Ways To Power The Converter: With Its Ac Adapter, Using 5-50-vdc Terminal Block Power, Via An Optional Usb Power Adapter Cable (which You Plug Into Your Pc''s Usb Port And Is Sold Separately), Or Over A Poe Link. You Can Even Use Multiple Power Options At The Same Time To Provide Maximum Redundancy And Ensure That Your Mission-critical Applications Remain Up And Running. For Instance, You Can Connect A Converter To Power Sourcing Equipment (pse) For Poe While Also Using Ac Adapter Power, Dc Terminal Block Power, And Usb Bus Power. Then, If Any One Of These Power Sources Fails, The Other Sources Will Continue To Supply Power To The Converter Seamlessly.you Can Also Connect A Pse Switch To An Uninterruptible Power Supply To Ensure That The Switch And Each Connected Media Converter Always Have Power. The Converters Come With Din Clips, So You Can Attach Them To A Din Rail. When Installing Multiple Industrial Multipower Media Converters On A Din Rail, Use One Dc Input Source, Then Cascade From One Dc Block To The Next Until You Reach The Maximum Current Available (for An Example, Click On "application Diagrams").

convert 10/100/1000base-t To 1000base-x Sfp With Easeif You Need To Extend Your Copper Network With Fiber, Look No Further. Poe++ Media Converter Easily Converts 10/100/1000base-t To 1000base-x Or 100base-x Sfp. Power-over-ethernet Supportwith Full Power-over-ethernet (poe) Support, This Media Converter Can Function As A Poe Injector. It''s Classified As Power Sourcing Equipment (pse) And Can Provide Power To One Or Two Powered Devices (pds) Using Standard Utp Cables. The Converter Provides Up To 60 Watts Of Power Per Rj-45 Port, Allowing It To Power Cameras, Wireless Access Points, And More. Configurable Featureschangeable Features Include Link Modes And A Poe Power Reset Function That Enables A Pd Device To Be Reinitialized Remotely, Eliminating The Need For Costly Trips To Pd Sites. Link Modes Can Be Configured To Propagate Loss-of-link Faults To Managed Devices, Immediately Notifying Administrators Of Network Outages. Works With A Variety Of Fiberpoe++ Media Converter Supports Fixed-fiber Connectors And 100-mbps Or 1000-mbps Sfp Transceiver Receptacles. It Also Supports Sfps For Multimode And Single-mode Dual Fiber As Well As Single-mode Single Fiber In Standard And Cwdm Wavelengths. Plenty Of Mounting Optionsthis Compact Standalone Media Converter Can Be Tabletop Mounted, Wall-mounted, Or Din-rail Mounted Using An Optional Din-rail Mounting Kit. It Can Also Be Mounted On A 1u 19-inch Rackmount Shelf. Made To Work In The Toughest Environmentswith An Extended Temperature Range Of -40° To 75° C, This Hardened Media Converter Can Withstand Some Of The Harshest Conditions On Earth, Making It Perfect For Industrial Applications.